DIY Install video on a 2014 Chevy Sonic RS Hatchback. 1.4L LUV engine with turbo.
Intake purchased from Morgan Performance Fabrication
http://www.mpfab.com
Hope y’all like!
Chevy Sonic MPFab Intake Install
1,608
Like
Save
){kind=link}
Comments
Comments are disabled for this post.
Looks and sounds great! Is it competible with diesel sonic?
Super in depth video. Thank you for taking the time to make this. I did want to mention that you shouldn't need to trim the honey comb. They are cut to size already. You only need to work it into the velocity stack. 30sec install, tops. It will conform and the additional tension keeps it in place. Also the heatshield placement is slightly off. The forward edge of the shield should be between the headlight adjuster and the triangle tab on the core support. This way, it is 90deg to the inlet tube and it fits the engine mount and AC lines more snuggly. Great video!
is it carb compliant?
Could this intake cause P1101 code?
Did you already have the updated blow off valve before you installed new intake.
Great video… I have learned alot from your videos… I myself have the Zzp closed cold air intake I think it's a lot easier to install than the Mp fab intake .. Check out there video on it I think you would agree plus it looks a lot cleaner and it actually closes off the open part keeping less hot air from getting into the air filter plus still gives a great Hissss sound … have a great day from your fellow Sonic rs owner Dakota …
Is the sound coming from the intake only or the intake + the Bypass valve that you change?
Checking the AC lines is a great tip most people don't think of, but you don't have the heat shield installed properly the front edge of the heat sheild should be to the left of the white headlight ajuster
I'm selling my sonic ltz but still a great video