Installing an oil catch can can help prevent the notorious blown rear main seal. Moisture collects in the pcv line. The catch can will remove vapors from the line.
Oil catch can purchased on Amazon:
Tasan Racing 300ml Universal Aluminum Baffled Oil Catch Can Polish Engine Reservoir Tank Blue https://www.amazon.ca/dp/B0834RC1NC/ref=cm_sw_r_cp_api_glt_i_S37W4935MJNFY2YJ52AW?_encoding=UTF8&psc=1
#equinox
#diyautorepair
#gmcterrain
#oilcatchcan
Catch can was empty after driving 2000 km on my 2017 Equinox. Should I remove my catch can, just installed it 2 months ago.
If anyone is interested in how to modify their Ecotec 2.4 timing chain guide bolts, just message me.
Excellent modification, I shall try and install this catch can on my 2012 Captiva 2.4. Greetings from Germany.
the second hose you put on is a one ply really flimsy hose. Looks like the Ebay ones.
Does anyone know if this is helpful for a vehicle driven predominantly in warm weather? Thanks in advance!
Number one you should tell people why would you put that on the reason behind the catch can number two you should be telling people how much that catch can cost number 3 did it help with the problem.
Hi bill quick question I see an oil catch can would you be able to assist me in learning what’s the advantage of having that in my equinox ? Pros and cons?
Thanks. I need to buy it.
will the oil catch can freeze in cold waether
Why put this catch can on it for?.
I recently installed one on my 2012 Equinox. the can filled after about 2 weeks. I did NOT use the steel wool filter and I don't see what the purpose of the steel wool filter?
Iv just got one too for my rx8 and got metal braid lines coz I had little race and went round a bend fast and some oil went up into my air intake and had lots of smoke out the exhaust lol Did you use the round rubber ring seals on each end of the lines
Now that you have used the oil catch can for a few winter months in Ontario how did it perform? Any issues with freeze up in the can or the air box?
Should the can be mounted lower? So that the tube coming from the valve cover slopes down? My understanding is that moisture in the OE U-shaped tube would freeze because it sits in the low spot. Frozen is when the rear seal blows. Thoughts?
I did same setup but found the inlet on the side of the air box didn't have enough vacuum. I ran my hose into the hole I drilled in the top. Also found a stainless steel scrubber in the can was much more effective at condensing the liquid and vapors than the built in baffle.
One more thing guys when you do this make sure to remove the intake and check the PCV valve hole make sure is open and clean !!
Hi Bill is Fc219 cap will help? I will purchase my first used suv 2017 with 43,000Miles . What are the other things to keep in mind to avoid engine problems or oil burn? Thanks bro.
Just a bit of that steel wool going between you turbo blower ang casing means problem. Hope i'm correct.
What is the size of the blue hose? I just bought an Equinox and I want to do the catch can mod to it.