How to Replace Plenum Gasket 03-07 Cadillac CTS

How to Replace Plenum Gasket 03-07 Cadillac CTS

1A Auto shows you how to repair, install, fix, change or replace a cracked, leaking or warped engine air intake manifold. This video is applicable to the 06 Cadillac CTS

🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tSk/1AXAA00013
• 10mm Wrench http://1aau.to/tfd/1AXAA00010
• 13mm Socket http://1aau.to/tv6/1AXAA00015
• 15mm Socket http://1aau.to/tv6/1AXAA00015
• 18mm Socket http://1aau.to/tfC/1AXAA00043
• 7mm Socket http://1aau.to/tpi/1AXAA00017
• Ratchet http://1aau.to/trL/1AXAA00016
• Socket Extensions http://1aau.to/tv6/1AXAA00015
• Torque Wrench http://1aau.to/tea/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/tay/1AXSS00035
• Painter’s Tape

For More Info visit us at http://1aau.to/h/Tx/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

38,075
Like
Save


Comments

McBiscuit says:

What is the name of the hose you are disconnecting at 4:21 called?

H2 G4Lv says:

Were is the map sensor position?

Benito Tamez says:

I didn't remove the wiper transmission and found it unnecessary. It didnt block anything. I did see a skipped step not presented in the video. The space behind the battery and the metal was not shown how to remove but was showed already removed into the video without steps. I did not remove it. It only blocks the rear manifold bolt from easily being taking off or torqued. I ended up torquing 5 of the 6 and rear bolt at my discretion. With a shallow socket was easy enough.

Mr F2015 says:

What would be the reason to replace the Air Intake Manifold Gasket ?

Will Webster says:

this should be relatively the same for a 2009 3.6 CTS right?

YoGoADP17 Plays says:

What are the small hoses connected to the manifold

daniel bahnean says:

Damn, good thing I have an sts, more room to work with.

Comments are disabled for this post.