This video explains how to check for codes on your car. This is intended for the 5th Generation Cadillac Seville, but this can also be applied to the 2000-20…
This video explains how to check for codes on your car. This is intended for the 5th Generation Cadillac Seville, but this can also be applied to the 2000-20…
You must be logged in to post a comment.
Thanks for the post. Helpful
It seems to stall when slowing down and put endless money fixing the wrong
problem. I just checked and got some codes that were history and wrote them
down but when they were at the end I turned the key to off position now I
cant get the codes now. I got 4 but I wrote em down wrong because I was in
a hurry to write. u1255-ipm b1359-rim1255 and msm 1875 which is seat. It
wont show codes now somehow it clears them after from taking the key out?
The codes only reset when you hit the “On/Off” button after the codes have
finished going through. What is your issue?
Does it reset the codes if you turn the key to the off position after
checking? I cant seem to get a code and there is a issue but it wont seem
to come up ever???
I have a 2002 cadillac eldorado etc is there a way to chk and reset the
codes? Plesently has a TCC code but it does go into overdrive.
The Eldorado’s use a different technique to check and clear codes. Check
around on the internet but I believe it involves using the Off and heater
control on the climate control unit.
New to this Cadillac but you helped. I had a history of car codes to
inherit that are no longer relevant. Now I pay attn. I cleared the old
ones. Pay attention to the new ones.
I just had this problem with my ’97 Caddy DeVille. Have the charging system
checked (battery, alternator, starter) checked. Autozone can check these
parts. Or any mechanic shop can check the charging system ($24.99).
Usually, when this code occurs the alternator is going out. I had to
replace my alternator.
Thanks very much needed …just bought a 2003 Seville STS…
Where do you look up the code meanings?
About time,,some one did that. GREAT VIDEO THANKS
Google
If U codes are nothing, then why are they showing up? Means something
wrong??
how do i set to where the steering wheel and the seat stays at the place i
want to stay at, because of previous owner has set to where i cant even set
it at.
I didnt even know i was able to do this! Gonna go check it out. Ive been
having the service theft system code since i got my seville also. Good
video!
Great video! thank you for the help 🙂
my 1998 Deville dash buttons are different and on opssite side, Its a
Deville not a seville, any help?
First get ur alternator tested if its keeping a a good current also check
ur battery voltage. My temp & gas gauge were not working in mine, replaced
the battery & Bingo! Fixed!
U have really good videos. Keep it up man. Us be a good reviewer of cars in
general.
Thank you man!!!!
This video was such a great help. It helped me get to the internet to
research the codes. Everyone was so helpful, but yours was the beginning to
my finding. Appreciate you.
Mine says “battery not charging
..charging system needs service” alternator??
To do that, set the seat in the position that you desire. Press Set on the
door panel and then press the “1” or “2”.
Never knew anything about that. Thx for posting.
How do you change the name or reset the name on your dashboard? I have not
been able to do that. I appreciate your help. Thanks!
yes you do not need a sanning tool this also works with 97-99 deville’s and
98-04 Eldorado’s caddy’s were pretty cool because of this 😀
To change the name on the dashboard you will need a GM Tech 2 for that.
Some dealerships will do it for you if you ask nicely next time the car is
in for service.
I had a system put in my 2002 deville n after my gas dont read or temp also
my transmission life stuff like th at dont wrk any advice
I have a cadillac Seville sls and it has gas and battery but won’t turn
over. I can hear the fuel pump so I know that is not the problem. What
could it be? Would a code tell me?
The diagonostic mode can also be entered during driving, even erased. Just
enter the mode by pressing the two bottoms and wait until the dash display
returns, it says “all codes?” then press the info down bottom … the
display says: “clear all codes?” then press the on/off buttom. “All codes
cleared” will be displayed. To return to the desired dash mode press now
the mode buttom for the display left of the steering wheel. This procedur
is very useful for erase the check engine light for ex.
Sweet…so you dont need a scan tool?
Thank you so much. I will be sure to ask nicely the next time my car is in
for service. Now it keeps cutting off. My mechanic said it was a crank
sensor. He replaced it today and it still cut off. It starts back up but it
keeps cutting off. Have you had any experience with them cutting off?