In this video I install a digital vent boost gauge on my E90 BMW. I install this on my 335i with the N54 engine.
I go over its functions and provide step by step DIY installation instructions.
In my opinion this is an elegant and hassle free way to monitor your boost. Sure you could data log via your phone or tablet but sometimes you just want to jump in the car and go. Always having boost monitoring at your fingertips is a nice feature.
This kit is made by a company called P3. If you’re interested in purchasing the gauge kit I installed you can do so here (affiliate):
https://bit.ly/396mXg6
You can also get a version that plugs into your OBD port and provides more parameter to monitor. That can be found a this link (affiliate):
https://bit.ly/2IUmHGa
If this is the first video you are catching of mine please consider subscribing. I upload regularly.
Thanks for watching 🙂 When you see the word “affiliate” listed beside any link in my description please know that this is a custom link and I will earn a small commission if you opt to purchase using said link. This is at no extra cost to you so it’s a win all around 🙂 Thank you!
){kind=link}
How do I turn it off in case I get pulled over
How do you have anti lag
Could you use the T section that goes to the exhaust flapper if not using that (most are not) ?
I ran the gauge wiring from my autometer ES series to a fused add-a-circuit, I just plugged into the dude box on a ignition controlled power source.
No cutting wires, no splicing, and a very hidden setup
My ground is to frame behind the dash.
I think it would go well with something like this too.
$300 no way. I would rather by an autel or launch scanner that can read intake MAP sensor, and a lot more. Certainly I would rather see what the DME sees, not another vacuum sensor.
Hey so I drove my n54 335i with no serpentine belt at low mhp for like two miles dint get an overheating mssg ..do you think theres a possibility i might have damaged the engine ?
Auto high beam retrofit?
I dislike how you turned your channel into clickbait titles and not straight to the point anymore. So much filler
My car is not as old as yours but one of my actuators for heater core stopped. Recirculating air is the only function that works, seems the regular setting is stuck closed. I’m suggesting a video so I can fix mine lol
where did you get that wrap looks really good!
I have a bmw f30 n20 INJEN intake can I use the vacuum plug (cover with a nipple) on the intake to connect a vacuum line
the AK-Motion display made in Germany is by far the best display for our cars. The bloke makes it for more bmw models. It connects to CAN-BUS so you can do crazy stuff with it.
Do you know what i need to make a retrofit of non navigation to cic?
Great video and content as always! I have an Awron gauge in mine which I absolutely love! There’s on eBay at the moment too!!!
Hi like the video and apologies for been off topic where did you get the dash trims ?
Great content as usual. I've referenced your vids for countless things on my 135i and its been a great help, so thank you. Quick question: how's the 335is clutch been holding up with your upgraded turbos? There are so many mixed opinions on that clutch.
What about 1er?
What cluster/gauges do you have? They look sick glowing white
Is that a bit pricey for what it does
beautiful gadget, Thank you.
You should do a video on an engine temp gauge
Plz do a diy video on how to set up anti lag to control with paddle shifters on a manual car
I prefer Posi-Taps for tapping into wiring. Check them out https://www.youtube.com/watch?v=93JYQc1bG20
May I ask what you do for a living? You seem to know a lot about electronics
My friend just change this Ugly wheels !!!