Car Fix DIY Videos

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com https://trq.video/ib-1AECS00161

This video shows you how to install a new crankshaft position sensor from TRQ on your 2006-2010 BMW 550i (4.8L V8). The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

Once the sensor is installed, you will need to use a manufacturer scan tool to perform a crankshaft position sensor relearn.

This repair was done on a 2008 BMW 550i Base 4.8L Sedan 4-Door RWD Automatic and the process should be similar on the following vehicles:
2006 BMW 550i
2007 BMW 550i
2008 BMW 550i
2009 BMW 550i
2010 BMW 550i

Tools you will need:
• Phillips Head Screwdriver https://trq.video/obWe-1AXAA00013
• 16mm Socket https://trq.video/ocyr-1AXAA00015
• 8mm Socket https://trq.video/ob4u-1AXAA00017
• Torque Wrench https://trq.video/obzQ-1AXAA00044
• Gloves https://trq.video/obMI-1AXSS00048
• Safety Glasses
• 5mm Hex Socket
• Scan Tool
• Pick https://trq.video/oadA-1AXAA00037

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.