How to replace anti roll bar bushes / sway bar bushes on BMW 3 (E46) [TUTORIAL AUTODOC]

How to replace anti roll bar bushes / sway bar bushes on BMW 3 (E46) [TUTORIAL AUTODOC]

How to replace anti roll bar bushes / sway bar bushes on BMW 3 (E46) 1.8 Coupe 02.1999–07.2006 [TUTORIAL AUTODOC]

Anti roll bar bushes on BMW 3 Saloon (E46) (02.1998–04.2005) / BMW 3 Compact (E46) (03.2001–02.2005) / BMW 3 Convertible (E46) (04.2000–12.2007) / BMW 3 Touring (E46) (10.1999–02.2005) / BMW Z4 Convertible (E85) (02.2003–12.2009) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.

🔝 Top brands that produce anti roll bar bushes: FEBI BILSTEIN; MEYLE; SWAG; TOPRAN; LEMFÖRDER.

📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036709825?pid=Youtube

🛒 On our website you will find a wide range of auto parts you are interested in: https://www.autodoc.co.uk/?utm_source=YouTube&utm_medium=description&utm_campaign=1824_main
Anti roll bar bushes: https://www.autodoc.co.uk/car-parts/stabilizer-bushes-10696?utm_source=YouTube&utm_medium=description&utm_campaign=1824_ersatz1
Anti roll bar bushes for BMW 3: https://www.autodoc.co.uk/car-parts/stabilizer-bushes-10696/bmw/3er-reihe/3-coupe-e46?utm_source=YouTube&utm_medium=description&utm_campaign=1824_ersatz2

WD-40 Grease Spray: https://www.autodoc.co.uk/wd-40/13563346?utm_source=YouTube&utm_medium=description&utm_campaign=1824
LIQUI MOLY Copper Grease: https://www.autodoc.co.uk/liqui-moly/9678170?utm_source=YouTube&utm_medium=description&utm_campaign=1824

🔔 Subscribe to AUTODOC’s channel and don’t miss new videos on car parts replacement ➜ https://www.youtube.com/c/AutodocUk?sub_confirmation=1

🛠️ The tools you need to replace anti roll bar bushes:
– wire brush
– WD-40 spray
– copper grease
– drive socket no. 16
– wheel impact socket no.17
– ratchet wrench
– torque wrench
– phillips screwdriver
– wheel chock

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:
► BMW car repair tutorial — https://www.youtube.com/playlist?list=PLWep5LzT0sxkzGFDibj8Js-D_BlOzV5Do
► BMW 3 E46 car repair tutorial — https://www.youtube.com/playlist?list=PLWep5LzT0sxlrZzJ2LwR3ZRbK2is26dj9
► How to replace a front shock strut on BMW 3 (E46) — https://youtu.be/hAzSn5nGBqQ
► How to replace spark plug on BMW 3 (E46) — https://youtu.be/9boEpN_N5Zc

Mobile Shop: https://m.autodoc.co.uk

📢 AUTODOC in social media:
Facebook: https://www.facebook.com/autodoc.co.uk
Twitter: https://twitter.com/autodoc_berlin
YouTube: https://www.youtube.com/c/AutodocUk
Instagram: https://www.instagram.com/autodoc_autoparts

#autodoc #autodoctutorial

Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.

6,330
Like
Save


Comments

Graham Clay Clay says:

Does this creak under load notice the steering inner, s do

kangys061767 says:

I think the Braketut Torque

is not 54Nm, but 22Nm.

I fastened it at 54Nm and broke the bolt.

Andy B says:

What was the reason for removing the one wheel ?

GuessWho183 says:

Car should be on the ground when you tighten bolts…

rbh10000 says:

Did not wipe the anti roll bar clean after removing the old bushes. Copper grease spray would have contaminated the disc braking surface.

MrVM41 says:

Copper grease on the rotors and all over the brake disc ! Best way to wreck your pads, spray the inside of the wheel instead , better still use a tube and your finger to control the amount you put on you lazy bastard.

The Xeonator Channel says:

The usage of the torqueing wrench from mechanic is just rediculous and wrong!

Comments are disabled for this post.