BMW Fuel Injector Seal Tool: https://amzn.to/2RCRHM5 UK: https://amzn.to/344XaAQ CA: https://amzn.to/2V6Oeb0 DE: https://amzn.to/3kYUmfg
BMW’s Direct Injection Injectors have a special teflon ring that is installed on the tip of the injector and must be replaced each time the injector is replaced. You then must use a special tool that allows you to install the injector seal to the correct dimensions. I decided to go a different route and use home made DIY tools to achieve the same result. I used a piece of pipe that I purchased from a local hardware store and modified it as shown in the video to work for installing injector seals on BMW N20 engine. I recommend getting the correct tool and doing as per BMW instructions. This is for entertainment purposes only and try at your own risk.
Teflon Seals: https://amzn.to/3cmnd9l UK: https://amzn.to/3cjAsHH CA: https://amzn.to/2V6Fmlz
Decoupling Element: https://amzn.to/34ADNQ5 UK: https://amzn.to/3a5DaPH CA: https://amzn.to/3a997GL
*— MUST HAVE CAR ITEMS — *
My Favorite BMW Scanners: https://amzn.to/4b6GQBa
My Favorite Car Scanners: https://amzn.to/3tR2VTT
My Favorite CarPlay Units: https://amzn.to/3Uc8lTZ
BMW Focused Mechanic’s Tools: https://amzn.to/3krC4J1
Portable Tire Inflator: https://amzn.to/3V5F63v (my favorite)
Portable Jump Starter: https://amzn.to/3L3YNUX
Favorite Dash Cam: https://amzn.to/41EdqWe (under $150)
Car Phone Mount: https://amzn.to/44bW1oM (MagSafe Air Vent), https://amzn.to/483S5ty (+Wireless Charger)
“BMW” Battery Charger: https://amzn.to/3HahLIi
GEAR I USE FOR FILMING: https://amzn.to/3Ex3RyI
______
If you’d like to support what I do, please consider supporting the channel for just $1 a month: https://www.patreon.com/Simplecarguy
https://www.instagram.com/simplecarguy/
http://simplecarguy.com
—————————–
Links are affiliated where possible.
This means if you click on the link and purchase the product, I will earn a commission.
){kind=link}
Thank you guys so much for watching!
If you'd like to order the seal tool or the seals, see below:
BMW Fuel Injector Seal Tool:
US: https://amzn.to/2RCRHM5
UK: https://amzn.to/2K4dbgR
CA: https://amzn.to/2V6Oeb0
Teflon Seals:
US: https://amzn.to/3cmnd9l
UK: https://amzn.to/3cjAsHH
CA: https://amzn.to/2V6Fmlz
Decoupling Element:
US: https://amzn.to/34ADNQ5
UK: https://amzn.to/3a5DaPH
CA: https://amzn.to/3a997GL
It be nice if you said what diameter pipe lol
Where did you get the prop from? Thank you!
Thanks for the video, I’mma try this. It turns out S58/B58TU have a different width stem so the seal kits don’t actually work with them.
mines already installed, so I dont need to do this.
Great video
I think you forgot to mention the seal needs to stay compressed in the pipe and once taken out it needs to be inserted into the injector housing within 30 seconds or it will expand and not seal properly
Hey messed up a set of seals the seal formed crooked
Hi pal, got to change my valvetronic… think it’s completely failed.
Don’t happen to know what mm diameter of the end of the injector is?
Going to replace the seals using half your method, but going to use it fuel injector rubber hose with a jubilee clip that I’ll tighten up over the seal until it’s fitted. However, I don’t know what size hose Internal diameter to buy.
Check my videos to see what total failure of the valvetronic looks like ha
I bought mine from precision raceworks. And it’s awesome !!!
Where can I get the metal sealing rings ?
Great video going to try the same method on my seals. Do know the inner size of the brass tube you used? I would guess maybe 8mm or so? Thanks
Cool vid!! Where did you get the teflon seal by itself?
A very creative solution and tool design!