filmed a video on how to code in AUX in the Idrive for the E60 5 series BMW (should apply to most BMW coding on other series). step by step on using NCS expe…
filmed a video on how to code in AUX in the Idrive for the E60 5 series BMW (should apply to most BMW coding on other series). step by step on using NCS expe…
You must be logged in to post a comment.
){kind=link}
Its nice however it gives lots of headache for E63 as NCS expert does not
recognise the car! Giving errors such “Faulty Chassis” then you force it
and finally realises thats an E63 but still giving loads of errors. For E60
its fine but not for E63.
Very good job.Bravo.
that cable work with Iphone without any modification?
HI DAVE, THIS ERROR APEARS COAPI-2041: WRONG ECU CODING INDEX
A_E60CCC:CODIERINDEX =0CH CAN YOU HELP ME. THANK YOU
can you make a video to show how to program to program window up with fob?
What a hassle just for an AUX port.. My E60 has BT to call but no AUX port
or usb, just shitty cd player… Da Fuq BMW?
Can u do a video on how to install the Software in the compu. I order the
same cable u have and I’m having problems to installed in my laptop.
Hi roskinc! I bought, connected and programmed my aux cable and it works
very good! But I added the VO to both light module and CAS. I read it in a
coding forum, that you should add the VO to both modules, or there could be
a problem later. Best regards, Fredrik
I dont have revtors profile and did not use it either. I used default
profile, but mine works for programming also, I think.
What computer did you use? is that downloadable online? and how about the
cable interface?
Does this work for a 750li?
hey bro thanks for the vid! did u have the profile revtor already installed
on ur ncs expert or did u load it. I already have the file Revtor.PFL on my
computer but I dont know how to add it in the profiles on ncs. can you
help??
Hi, i would like to know if i can change my little screen business 2005
with a 8,8 screen without modification or coding?
great video I added the AUX on my E60 2006 530xi working perfect..had a
little problem with ediebas but I corrected and I am enjoying my music from
my cell now
Perfect instructions. Thanks for great video
Fantastic – Thanks for all your help and quick response to emails Here are
a few notes: Windows 7 Version NCS_EXPERT 4.x Had to change com port to 1
had to make sure to set com port latency to 1 – got errors otherwise used
EXPERT_MODE instead of REVTOR’s NCS_EXPERT_PROFILE did not have NAV – used
MASK – only one “OK” button to press – video has two for “CAPPL” had to
remove “nicht” from “nicht_aktiv” did not hear the “CO” in “CODIERDATEN
LESSON” I ended up pausing the video and counting rows
yes, send me an email roskincdavid@gmail.com
Can you make a video how to code retrofitted ccc unit instead of m-ask
unit? Thank you)
Just found your videos. Is there anyway I can buy your aux cable and have
you program it to my car? I noticed from ebay you live about an hour from
me.
Hi, Roskinc Is it necessary to FA_WRITE to LMA OR LM also.
Thanx! You are the best 😉 /Danne from Sweden
Thanks For well Explanation, That Was Helpful. i have 06 525xi No DVD And I
Was Trying To Follow Your Instuctions And I Got Stuck> I Need Help. I Get
to That Point On Your Video 6:11 Said Press f6 And All That Thinks Load Up
Well my Little Window Pops Up And Says Something I Dont Know What And F4
Dont Show Up Like On Your Video. Im, Not Sure what To Do Next, Can You Help
Me please/????/ Thanks
I was trying to watch your video but it keeps pausing
Hi I downloaded the ncs dummy / revtor file to my NSC expert. But its not
visible to choose when I open file – load profile . How do I edit it to CNS
expert? regards Eddie
My NCs says profile ungultig on rectors profile. Any chance of a link as
Google is getting me no where
Cheers for all the help mate. I have a problem though. My NCS Expert is
coming up with error profilversion 2.0 ungultig. What can I do or should I
do?
The updated FA list should also be written in LMA, not just CAS! Also it’s
quicker and easier to just code (SG_CODIEREN) the CAPPL/MASK after updating
the FA list. No need to do any manual parameter changes.
Also, I already have a mobibridge installed on the truck were the cd
exchanger option is, I have the cable on my dash, do you know how to
program the car with this option?
I meant on the trunk!!
I’m glad you are able to code your car. The ebay seller that sold me my
cable sent me a bogus ncsexpert software. The ones i found online isn’t
working either. Do you happen to have a copy of the disc? Thank you.
Great vid! I was trying to get this done for several months and kept
running into road blocks because people’s forums didnt go through step by
step. I had issues initially because I kept getting a FA error message, but
it when away when I update the NCSexpert to 3.1.0…..the only other thing
that gave me a good scare was my car when it died. I thought I programmed
something wrong! If anyone needs the files, hit me up at
mchlhlls@yahoo.com.
i searched for this Revtor’s NCS Expert Profile but i only found something
like NCS Dummy profile. is it the same?
Yeah from the Control Panel. Go to Control Panel -> System and Security ->
System -> Device Manager (in the left pane). Make sure to hook up the cable
to see the COM1 port (it’s actually a virtual port).
its the cameras shutter speed causing it to look like its blinking.
the vehicle in the video is a 525i
great video. Just wondering if there is a way to set the Aux volume
independently to other sources? The aux is much quieter than other sources
and it blows my ears each time I forget to switch source before lowering
the volume..
2004 525i. Got AUX added to VO but that’s it’s…..having issues
Nice tutorial! keep up the good work, But i have a little problem. I coded
AUX in it. but i can;t use the CD anymore, any idea?
Thanks. Where to upload Revtor’s NCS Expert Profile to work???
It says that because I don’t have a cd inside the ccc. I haven’t used a CD
since the first day I got the car, been using AUX ever since.
Revtor’s NCS Expert Profile works. Thanks. I’ll try now programmed :DD
you AUX_CONFIG nicht_aktivnot_ me AUX_CONFIG not_mounted aux is activated
is not a problem..
Sry my misstake (Didn’t watch the whole vid) ofc i has to be activated
after being added to CAPPL.
i believe you just add the cdc to the vo, i think that thing your talking
about takes the place of the cd changer like the dension products do