BMW E46 Angel Eyes Install DIY

BMW E46 Angel Eyes Install DIY

Welcome to ShopLifeTV!
In this video I show you how to install angel eyes on a BMW 325i but can be used for various models in the E46 chassis. I take a part the headlight and show you how to wire them. Let me know if you have any questions!

Instagram: @ShopLifeTV
SnapChat: @ShopLifeTV

FAQ:

How old are you?
-20
What car do you own?
-S54 swapped E46 Sedan
What is your name?
-Ankur but you can call me Jason
Where is your shop located?
-Alhambra, CA
How can I contact you?
-You can email me at executiveautocollection@gmail.com or direct message me on instagram @ShopLifeTV

Disclaimer: Not sponsored

21,672
Like
Save


Comments

rscosworthfan says:

whatched a couple of your vids you are a real wizz kid man nice job

Brandon Rodriguez says:

are these legal in Illinois?

kalimba soter says:

Thank You for the tutorial Jason!! i just one question concerning my E46, is that normal that i dont have that Red/Yellow wire at 15:55 for +12V after ignition?

Marcell Lencse says:

Could you make a video how to install smd angel eye's yellow cabel? Is this when i unlock my car, the angel eye is going to light? Thanks a lot

camocorndog says:

best DIY video out there! thanks shoplife love the videos!

Poppin' Suspence says:

Thanks again for another useful video!!

Gaming Shenanigans says:

Hi shop life, do you have a link to where you got the angel eyes? Great tutorial btw! 😀

sarcastixx74 says:

Nice vid again mate. Just in case people get mixed up when purchasing, the CCFL lights only use a pair of invertors that connect straight into the sidelight connecting wires and don't need a separate relay wired into the DME+earth of the car. They are very, very easy to install. The set you demonstrated are the LED ones that have their own resistors built in to avoid canbus errors and they need a full circuit to operate. Best thing about those types are the option to route the wiring into the cabin so you have the fade in/out when operating the central locking. Again, well demonstrated and easy to follow. Keep up the good work! 😉

Robert Barta says:

if i want to have rings turned on when parking light is on can i simply put -+ on parking light wires directly to rings without any inverters or relays?

m.p. moyer says:

I have a pre-facelift coupe (july'02 330ci) and to remove the turn signal it has the phillips head not the push tab.

SIKS22 says:

Are these error free?

jesse keomuangtai says:

hey jason i have a question i had my uncle reprogram my bmw e46 brain to make my headlights turn on automatically without touching my headlight switch. i can't get a hold of my uncles anymore because something happened to him and i was wondering if you know how to program it so i have a choice to have my headlights on or off if anybody knows please help! thank you

Chad Stanbury says:

where did you get your angel eyes from?

João Loureiro says:

Excellent video, very well explained. Thank you for sharing the information 🙂

NyQuetin Parks says:

link to angel eyes?

Gouky says:

Is this considered simple?

Jose Dorantes says:

Just finished installing mine, look amazing great tutorial nice job

crisanto avellanoza says:

hi do i have to buy a wiring harness? as i haven't really checked mine yet but i just want to ask while im still here. would appreciate your reply, tyia

Jordan Kilbourn says:

hey man great video, quick question… what corner lights are those? I like em and I'm looking for a similar style.

Apple tech studios says:

hi shopLife,

i have a 325i bmw e46 station wagon, it has had a engine management light on it for the past year, we have replaced, most of the pipes and elbows, fuel filter, mass airflow sensor, spark plugs and have constantly cleared light, so yesterday we ran a obd scanner tool on it and at idle it said disa valve to active is this normal? what do you think is wrong?

sarcastixx74 says:

Very good vid mate, well explained and easy to follow. I have a prefacelift M3 so the only difference to me would be the washer jets in the trim – these are not that hard to remove anyway. And for anyone wondering, the LED kits fit similarly to the same way as the CCFL ones do. Only difference is the CCFL ones only require an pair of invertors and have no added wiring to the relay/DME/earth. The led ones are usually brighter so it would be down to your individual taste what kit to go for. Plus you were spot on about feeding the harness through from the front as being the most awkward bit, just as well you only need to do it once! Saw a few other vids you've done, you're easy to follow and explain each step well – keep up the good work 😉

CoRe IMJEFF says:

Hey man I recently wrecked my car 2001 330ci it has 130k and it rolled on its roof but surprisingly not much damage to the roof but the a pillar is bent down and Every panel has damage. Idk if I should just junk it or repair it

Demigod22 says:

What hood is in your car

stovy says:

what is a face lift sedan ?

Write a comment