In this video I show you how to replace the washer pump on a BMW 3 Series E90. I go over all the items you need to do this job easily. This is a common problem on this BMW. The washer pump can fail due to an algae build up on the pump screen.
In this video I show you how to replace the washer pump on a BMW 3 Series E90. I go over all the items you need to do this job easily. This is a common problem on this BMW. The washer pump can fail due to an algae build up on the pump screen.
You must be logged in to post a comment.
You are very articulate and thorough in your DIY but I was getting a little nervous with how rough you were being with some of the parts! Great job and something I will be tackling shortly.
I'll be doing this today thanks for sharing this, very helpful.
Thanks for doing this video! I've got an issue with the front washers on my F30, and I'm guessing it's a clogged pump. I'll be giving this a try here this week.
Very well done video. You must be a teacher!. I did mine today. I just cleaned the black gunk in the filter/screen and it seems to be working fine now. I did not run the pump dry very much so I am gambling it will be OK. Never had to do this before in 40 years driving.
very helpful made it easy to do the job perfectly thanks so much mate
Thanks a lot! 🙂
Thank you very much for sharing this !!!
Thanks for this Great video!!!
Great informative video
Great Video! Don't know if I would have tackled the job on my Eo90 without It.
Thanks for the DIY. I Was going to just clean mine but ordered a new pump, your argument was compelling. Thanks again from Wales. U.K.
great video thanks!!
Used this video to save $250. Thanks!
I don't even have an E90 but your video was so thorough and well done I watched it all.
Great video and made to look like an easy fix. I hope my attempt over the week end will be as simple……
Good attention to detail. Complete step by step with no missing tasks.
thanks!
Thanks for the video! I used this to help replace the pump on my E92 and it worked great. One difference from the video was the absence of the plastic rivets on the inner wheel well liner – the outside edge just tucked inside the fender all the way around and there were only 8mm screws and one 10mm nut to take off. Definitely made removing that panel easier. Thanks again!
Great Video. thank you
Just what I needed for DIY on my e90. Great video!
The E90 is a little bit different, there is a quick connector out of the pump. It was loose, I just plug it again and it worked fine. Thanks for showing how to remove the trim panel.
GREAT video! Thanks!
Thanks for taking the time to film and share!
Love to see e90 CCC trouble shooting!
WOW!!! E90 and HD cam. Thank you very much!