Hello YT, this is my first video and I hope this helps anyone looking for information on installing an amplifier and subwoofer into an Audi A4 B8 as I couldn’t find information as easy as this video I’ve made for everyone. Thank you for watching!
Instagram: https://instagram.com/superrvolks?igshid=YmMyMTA2M2Y=
Camera: IPhone 13
Audio: Rode NT1 USB
Everything you’ll need for the install:
– Scosche OFC Wiring Kit https://a.co/d/87gDlj4
– Speaker Line To Female RCA Adapter https://a.co/d/3mqvW9o
– Crimping Tool Kit with Terminal Connector Sleeves https://a.co/d/3b17IZk
– Heat Shrink Tubing Kit https://a.co/d/hIygy8h
– Fuse Kit https://a.co/d/dyT4UvA
– Wire Crimper Tool https://a.co/d/d6z9NfQ
– Crimp Cable Connectors https://a.co/d/cmK5SgS
– Female Spade Connector https://a.co/d/4S6ql08
– Multimeter
– Heat gun
– 13 MM/10 MM Socket with 3/8 extension
– PH2/T-30 Driving Bit
– 1/16 & 1/4 Drilling Bit
– Trim prying tool
– 10MM Nut
Subwoofer and AMP setup:
– SA-12 Subwoofer https://a.co/d/2k36JJe
– QPower Sub Box https://a.co/d/0uF6uSM
– BOSS 1200W Amplifier https://a.co/d/iqhE9p5
#diy #audi #audio #car #automotive #B8
https://instagram.com/superrvolks?igshid=YmMyMTA2M2Y=
How are you securing the sub in the boot?
Did you have issues of your stock sub drawing too much power I hooked mine up and its farting the subs are getting power but too much is going to my stock sub
Where did u get the 2 speaker wires from?
Seems like your plus is going directly from the battery terminal, to the amplifier, with no fuse taken in mind. While this would absolutely work, have you had any considerations there?
If you use amplified signal you need connect wires to high level input and don't need remote wire…