After experiencing starting issues in my Audi RS4 B7, i decided not to faff around with relays and diagnosing wiring issues, etc. and go straight for Starter Motor change. This is a quick DIY tutorial. With all the right tools and about 3-5h you can do it on your drive.
#rs4b7 #diy
▶ RuskiWeldShit official merch: https://ruskiweldmerch.company.site/
▶ tires i use:
Extreme VR2 R7a medium compound
https://www.extremetyresuk.com/?ref=14
▶ find me on Instagram: @ruskiweldshit
https://www.instagram.com/ruskiweldshit/
▶ full Clio build can be found here:
https://www.cliosport.net/threads/ilyas-172-because_race_car.810989/
#ruskiweldshit #becauseracecar
▶ Give my page on Facebook like and a follow! https://www.facebook.com/Ruskiweldshit
▶ If you are new on youtube and would like to grow your channel faster, a must tool is TubeBuddy! https://www.tubebuddy.com/ruskiweldshit
▶ Where I get my Commercial Music 2 Months for FREE! (ARTLIST):
https://artlist.io/Ilya-495316
▶ My main photography and visualisation business www.ikrylov.com
if you Want to see more videos about my RS4, follow this link https://www.youtube.com/playlist?list=PLlD0kh0mRmTlqPiSwxxzoVI_5AKkrXYJS
Exactly the DYI I need for my RS4! Thank you!
Thank you for creating this video; it was very helpful! This job was a lot harder than I anticipated given how tight the spaces are around a lot of the bolts; especially for the heatshield. Here are the part numbers for the bolts that need to be replaced: Long subframe bolt: N90956803. Two shorter bolts: N90663002. Two bolts that connect the anti-sway bar to the end links: N90628205.
This is why I only drive old cars lmao
Does this work for S4 b6?
Do you recall specifically the tools needed?? Didn’t look like a terrible large amount. 16mm socket for the starter bolts?? 13mm for the cable on the starter, 13mm for the motor mount nuts, ball end Allen 6-7mm for the motor mounts?? Just curious, if going to do this at home and curious
Does anyone k ow if this is the same on the b6 s4?
I have a 2008 B7 RS4 I checked my relays (relays 645) they seem okay. I checked my switches they checked okay. So I was going to buy the starter and I was ready to take it out and I found like 16 gauge or 14 gauge single wire just unplugged. Plugged it back in and it started.
Thanks! Appreciate it
3.2 fsi. Needs new starter motor…I'm funked, last time I needed to replace a light bulb on the rear, I had to take apart half car. Not to say about my front ballast…
Placing any starter between the engine and motor mount is insane , its asking for starter failure .That is the absolute worst design ive ever seen.the 3.2 is just as bad .
Is it the same on the S4?
It’s time for my mine, having a delay in turning over in the mornings. Appreciate the video you made to help out. Спасибо ! От Колорадо
Have you had any coolant leaks from the back of the engine yet nice vid by the way
love that you get credit from your little one for your hard work!
Thankyou, interesting for the future if mine fails. You say to replace the bolts on the engine mount
Fantastic job great info, if you don't mind me asking what miles on your car?
Nice one mate good to know when mine goes good vid
V8 sounds sweeet! Just needs a turbo (or 2) Another project for you? 😀
nice one mate!
Great video
Subbed for more RS4 content!