Car Fix DIY Videos

Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1ABFS06012

This video shows you how to install rear brake pads and rotors on your 2007-2013 Acura MDX. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.

This process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/tbd5/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/tbd5/1AXAA00013
• Pry Bar http://1aau.to/tGR/1AXAA00020
• 10mm Socket http://1aau.to/taUh/1AXAA00017
• 12mm Socket http://1aau.to/tbu4/1AXAA00015
• 17mm Socket http://1aau.to/tbu4/1AXAA00015
• 22mm Socket http://1aau.to/tg6/1AXAA00266
• Air Compressor
• Brake Caliper Compressor Tool. Single Piston. Lever Style. http://1aau.to/oaq/1AXAA00288
• Brake Caliper Hanger http://1aau.to/tfW/1AXAA00084
• Pliers
• 1/2 Inch Air Impact Gun http://1aau.to/tnG/1AXAA00252
• 1/2 Inch Breaker Bar http://1aau.to/tkq/1AXAA00078
• Ratchet http://1aau.to/ta2s/1AXAA00016
• Torque Wrench http://1aau.to/tagb/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/twJ/1AXSS00035
• Copper Anti-Seize
• Gloves http://1aau.to/tw9/1AXSS00048
• sanding disc
• Floor Jack http://1aau.to/tKq/1AXAA00068
• Wire Brush http://1aau.to/toL/1AXAA00079

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.