How to Replace Front Strut & Spring Assembly 2004-2008 Acura TL

How to Replace Front Strut & Spring Assembly 2004-2008 Acura TL

Buy Now!
New Strut & Spring Assembly from 1AAuto.com http://1aau.to/ia/1ASTS01194

TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly. This video shows you how to install new reliable TRQ struts in your 2004-2008 Acura TL.

This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Pry Bar http://1aau.to/oa/1AXAA00020
• 10mm Wrench http://1aau.to/oa/1AXAA00010
• 17mm Wrench http://1aau.to/oa/1AXAA00010
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 12mm Socket http://1aau.to/oa/1AXAA00015
• 14mm Socket http://1aau.to/oa/1AXAA00015
• 17mm Socket http://1aau.to/oa/1AXAA00015
• 19mm Socket http://1aau.to/oa/1AXAA00043
• Needle nose pliers http://1aau.to/oa/1AXAA00051
• Needle nose pliers http://1aau.to/oa/1AXAA00052
• Side Cutters
• 3/8 Inch Air Impact Gun
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Bungee Cord
• Cotter Pin
• Hammer http://1aau.to/oa/1AXAA00091

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Acura TL 2004-2008 3rd Generation: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-08dT5zaGtO0VHIewSQxn8

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

8,748
Like
Save


Comments

TRQ says:

√ Watch the Video

√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts

√ Do it Yourself

√ Save Money

Kenny Man says:

You made it more difficult by unbolting the knuckle from the upper arm.

You can just take the lower fork out then remove the strut. No need to take the knuckle "spindle" off

Why! Disconnect the battery?

Don Johnson says:

Great step by step video. Like that you give torque values and nut sizes. I missed the torque value for the upper ball joint castle nut?

Sa1nt _John says:

That's the most curb rash I've ever seen. Geez!

Paul Laygan says:

Would you have a video for the rear struts?

Samuel Tobar says:

Is this the same process for a 2006 acura rl?

Comments are disabled for this post.