Easily and quickly remove and install rear trailing arm bushing in as little as 15 minutes per side vs. the factory “book” time of 1.8 hours per side. No nee…
Easily and quickly remove and install rear trailing arm bushing in as little as 15 minutes per side vs. the factory “book” time of 1.8 hours per side. No nee…
You must be logged in to post a comment.
){kind=link}
is the outer metal shell of the Honda/Acura bushing (or the hole in the
trailing arm the bushing goes in) tapered? if so, do you really want to
both remove the old bushing and install the new bushing by pressing them in
the same direction as shown in this video (from the outside of the car
towards the middle of the car)? i know it makes it a lot easier to do so
but would worry about possibly damaging the hole in the trailing arm.
you would want to because the toe will definitely be off.
SCH68100 I haven’t used it yet but it’s suppose to work without a press. I
use the factory cup and holder tool on a press and it take 10 mins. both
sides once off the car/truck.
Is there a tool for the front compliance brushing extractor and installer?
2006 Honda Accord LX SE?