To'
A short video showing how the headlamps, grille and indicator unit are removed from the SAAB 900 T16. A small, simple job today, but all heading in the right direction for getting it road-legal once again! #saab900 #saabturbo #saabclassic
Another little ‘how to’ video today as I replace the original gear lever gaiter with a fresh leather item from Steve Lewis SAAB. The gear lever assembly is disassembled to then clean up inside and out before re-greasing. I’d allow approx 40 mins start to finish if you’ve not previously swapped one. Hope it’s helpful […]
: \'how to\' headlamp removal')){kind=link}
: \'how to\' gear gaiter swap')){kind=link}
How to replace those crumbling temperature buttons in the Lexus RX330 dashboard. Who wants to be stuck with not being able to select up or down? You can buy the replacement contacts at http://twwongtai.com/ then install them yourself – no huge skill needed, I managed it OK. Music: “Buddy” by https://www.bensound.com
){kind=link}
In this video we’ll be showing you how to install a K&N cold air intake onto a 2015 Chrysler 300S. Tools needed and the link to an in depth written guide will be linked below. As always, please remember to like, comment and subscribe! Tools needed: 8mm Socket 10mm Socket 1/2in Socket 9/16in Socket 5/32in […]
')){kind=link}