This is a rear spring replacement on a 2012 Volvo XC60. Support lower control arm with jack. Remove control arm to knuckle bolt. Lower jack, you may need to hammer arm down. Remove spring. Attach spring isolator to new spring and reinstall. Make sure to note the notches on the top and bottom spring perches. Jack up control arm, squeezing the spring and arm into the knuckle. Install bolt.
slow down lol
Do you need to do an enlightenment after replacing the rear springs??
Thanks from Russia!
Fella… thank you!
I was told £400 plus VAT to change the rear two springs
Lifesaver!
Do i need tracking after that??
I am planning to do the same replacement on my XC60. How did you put the jack stand under the car. there is only one rear jack point of on each side. If you use floor jack to raise the rear, how did you put the jack stand and replace the floor jack? Thanks.
What body style is this on?
Can I use long spring to lift up Audi A4 2004 model well what am I supposed to do
Did you torque the bolts on the control arm connecting to the hub?
If so, what spec?
На volvo s60 2014 г так же меняются???
Do you need a spring compressor for the rear springs?
Useless video
bruh wtf your hair is nice as hell