Car Fix DIY Videos

Alan W says:

At 0.30 there should be two rivets there, someone didn't put it back last time, because it hard to put it back, Don't need to remove those rivets before remove the carrier panel, it will hard to put it back, I remove the carrier panel with the door lock all at once, first on rear door if fitted 1/4 window or wagon, you need to remove the short window's rail that fit front of the door lock, then remove the lock bolts and then you can remove the all out a little to easy remove the cable that from the outer handle to the door lock ,then can out at once.some models need to remove outer door handle at once.
after out ,then can remove and install the rivets easy., front door is easy because no window's rail there, Sorry you can't just show how to remove, that because install is different way to do,Hope this help!

Mdu White says:

Hello humble machenic which cars use the same electric window as the mk3

Carmen Hernandez says:

Im just cracking up by the way you're face has grease all over lol GREAT JOB BUDDY I ALOWAYS LIKE YOU'RE VIDEOS

Dean Harrison says:

I wish my best friend was charles

Jim Washington says:

Heya, any chance you might do a Eurovan power regulator removal. Kinda problematic. Rock Auto does have a rebuild service (rather than $500) Isuue for us in the shade is getting the cable type out.
thanks man

Young DRAGO says:

Mine has 2 clips that I cant get loose

Ulfhednosh says:

How can u remove the window if its all the way down and there's no power to lift it.

Rudy Olgin says:

How do you remove the electrical connector for the door latch? Where is the pressure point to release the clip? The front top, middle or bottom of the clip?

Zachary Helmuth says:

can you do a mk3 regulator video?

Grimshaw Grummage says:

Hey Charles, how do you reattach the rear window to the window regulator on the mk4 golf. They use the two piece plastic shims but they are so hard to reinsert and realign. In there are special tool thst allows youbto do the job better.