Please read http://www.myturbodiesel.com/1000q/a5/key-replacement-mk5-Jetta.htm for details on replacement keys, this video only shows how to program the key…
Please read http://www.myturbodiesel.com/1000q/a5/key-replacement-mk5-Jetta.htm for details on replacement keys, this video only shows how to program the key…
You must be logged in to post a comment.
does this work on a 2004 Passat? I have 2 remotes and they both went dead.
I replaced the battery in both and well they work for a day or 2 then stop
but if I like smash them against something they will work again for a few
days then stop again.
what can i do if i have a valet key and i want to program a new remote
If I am changing both of my fobs do I select 4 keys programmed? Then I have
4 fobs programmed, do I have to destroy the old ones to make sure they
can’t be used for my car? Will resetting to factory defaults turn off all
the extra features I turned on with VCDS?
Worked perfectly , thanks !
how can you program the ignition key after it get cut? if i buy key for my
vw jetta, and get it cut only, then use vcds to programe the 2 keyless.
what do i need to make ignition key programe?
Will a ebay vag com cable work with the vw mkv (rabbit) to do this? need to
reprogram another keyless entry because my had water damage. thanks!
الإنجليزيةالعربيةالإسبانية I can not remote programming 99 in their golf
estimated Aasaadena in this
Good work, we hope to see more instructional videos!
Is this procedure the same for the 2012 MK6 jetta’s?
nice work
No, i only have one key. it will cost £180 for brand new key and fob. i
wanted to change the fob but the immobilizer on my vw jetta is stuck in
their, so i dint want to break it. i want full copy of my current key
You can code the remote as long as the transponder on the key is programed
to the module switch the ignition on with the key that works close the door
stick the key to be programmed in the driver door barrel push and hold the
lock button and turn the key to the locking position 3 times and visa versa
with the unlocking button viola no diagnostic tool needed
How to Program Keyless Remote for VW Jetta 2000
Same steps for the mk4?
I just one bought for my Jetta on ebay for £35 with a blank key, so I need
to get that cut and programmed.
yes, mk4 same steps
i have a 1998 golf mark iv i need a new key fob as the current one s
starting to show 15 years of wear and tear the problem is its a round fob
with a seperate key how do i program a new key for it
I have to get one of the VCDS cables and software. Lost one of fobs for my
2013 Passat. Taking it in to get the NEW ORDERED key (140.00) and the car
re-programmed (think they said 90.00). However, my fob had more buttons
(remote start, for example). Costly mistake but hoping my LOST key will
show up. Too bad they don’t have a “find me” feature built in 😉
Lennonpolo: try calling your local lock smith and ask them how much they
will programme the key and cut it for you. I have asked lock smith and they
say they don’t accept your own keys, but ask any key repair shop who might
give you quote, please let me know the prices aswell.
Did you get your key sorted in the end? What did you have to do? I have the
same problem!