Replacement headlights can be found at: http://www.ecstuning.com/?utm_source=Youtube Replacing a headlight can be frustrating, here at ECS Tuning we try to t…
ECS Tuning: DIY – VW MKV Headlight Replacement
108
Like
Save
){kind=link}
- Tags:
Headlight, Replacement, Tuning
- Categories: Volkswagen
Comments
Write a comment
You must be logged in to post a comment.
This one can be tricky, it will push down to release – Take your time, good luck
How the f*** did you get the harness off?
When you’re working on anything electrical related in a car it’s not a bad idea to disconnect the battery.
Thanks for the vid! When replacing the entire unit, or even a bulb, do you need to disconnect the battery?
The passenger side is fogging up on the inside
So is there a way to remove the plastic cover ? P
thank you so much for uploading this tut.
I`d buy a new GTI
That kit you listed is a quick fix for now but If I was going to do this I would by a complete new housing, it is up to you!
So the screw at the top of my light on the left side broke and the headlight moves around would you recommend putting ES#252759 to fix my problem or would I have to buy a whole new light?
I’ve got to do this procedure to replace my passenger high beam bulb since the little metal clip decided to come lose from it’s plastic holder now there’s no way to secure the bulb with normal sized human hands and head to see it….
The video was done to show how to replace the lights. Happens to be the car used was already equipped with nice headlights.
The video was done to show how to replace the lights. Happens to be the car used was already equipped with nice headlights.
Ya. you replaced $2000 beams for a $500 halogen set this comes stock on a rabbit. Why would you do that?
Why did you replace r32 headlights with the most basic ones are you crazy?
Boss Video.
haha agreed.
you “downgraded” from HID to halogen? they are not the same headlights as stated
We’ll look into doing one for you in the future.
For Plug & Play Projector headlights for Jetta and Rabbit models, please see this ES number – ES#6476
If i want to install the HID projector i just have to plug it in or i need something else?
Same head light that was in the car – just showing how to remove and install
If you are looking to order -Please email sales@ecstuning for all GLI options
Whats the diference with the ones that you remove and the new ones installed? I have the 06 GLI and it have the Xeon lights one, but is new to me so I don’t know
thanks for the video, this made it much easier to get my headlight out to put the stupid high beam bulb clip back in
Correct, Vag-Com coding will be needed. Check out ross-tech site for more information.
Correct, same mounting points.
please help me, i have got a halogens headlights what do i need to install GLI bi xenon headlights? I need the VAG COM?
I have a 09 rabbit Is it the same way of the bolts that are on te headlight ? Cause my left side is loose I wana change it
This is the dumbest swap I’ve ever seen…removing HIDs for Halogens!??! WUT
OEM interlagos wheels
18×8 ET41