In this video we install an OEM style rack on a 3rd Generation Toyota Tacoma, covering the installation process and providing an after-look of the truck. This is one of many OEM style racks available on a variety of online sites for the 2016+ Tacoma.
){kind=link}
Did your rear bar hit or touch the antenna?
Hello, are the OEM rack rails adjustable? Can the span between the front and rear rails be adjusted? Thx.
Didn’t know if yours looked like mine
Looks like the fingers from rack that hold to base gasket are hot glued and I have hot glue on bottom of seal. So the seal isn’t good to sit flush. Plus on the towards back side of truck. About a 1/4 inch gap
It’s almost like racks are for smaller truck. And base might be for mine
Would have been nice if you pointed out in detail where the long screws go and where the short screws go. If possible can you reply to me and share this info with me.
Bro lots of fluff in this one. As a guy trying to get it done had to listen to all the extras.
No silicone on the holes ? Bad mistake
The tape thats under the paint is 3m double sided foam tape that is only good for a certain amount of weight before it turns itself and the paint above it into jelly. Take it off and seal it properly. I was told to never seal any body seam without a sparkling clean surface. Its easy enough now with all the 2 and 3 inch roloc or equivalent sanding discs. Do it right because the one fixing it next might be you.
Good information on the product. I bought mine on Amazon but I should have purchased on ebay. Jeff Bezos is a Globalist. Lol
I just bought a 21 TRD PRO Taco that has this on it. I want to take it off and sell it and get a Pinsu rack.
How you fix the plastic white plug in the front. Mine coming separate and don’t still in the hole ,we can glued ,,,?
GO OEM. Absolutely anytime you’re opening up holes on a roof picture holes in the bottom of a boat definitely use some type of windshield sealant or silicone as a precaution and I would install these in warm temperatures makes for an easier solid overall job.
That is the same as the rack available from Toyota accessories
What is the make and model?
Hey Matt, Any updates on rails?
A buddy of mine had water intrusion issues with his OEM rack. I wonder if it's worth bedding the screws with some silicone sealant?
Hi Mike C. Do u have the link to the rack?