Please consider becoming a supporter if you enjoyed this video.
Become A Supporter At https://www.patreon.com/toddsgarage
Disclaimer:
Due to factors beyond the control of Todd’s Garage, I cannot guarantee against improper use or unauthorized modifications of this information, or use of this information. Todd’s Garage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Todd’s Garage recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Todd’s Garage, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Todd’s Garage.
){kind=link}
Great video, I was able to change mine in about an hour following your steps. Thank you for posting!
Thanks a ton! Because of your video, I was able to replace my starter. I saved a bunch, and got I to fix something.
Very helpful video! Got my starter changed in under a hour after watching this wonderful thing.
Thanks a lot Todd, your video helped me greatly! Was having little troubles finding one of the two big screws, but found it after I saw the video a second time. All in all one hour job and saved hundreds of dollars.
Thank you so much for this detailed step-by-step walkthrough of how to remove and replace the starter in an older Corolla. I have an 07 and everything went smoothly. I watched this video a couple of times before heading out to do it and it took only about 30 minutes to change it out. Having all the tools ready beforehand was helpful as you stated in your video what sizes are required. My car that wouldn't start on me is now functional again (I also replaced the starter relay to make sure everything was essentially new).
Good video.
In my experience with several Toyotas now, I have just replaced the contacts on the original starter and they worked perfect again. If you open up the starter, you will see what I mean about those contacts. Really simple and super cheap to do.
Thank you soo much super helpful video! I wish you woulda started it at the end just to show the finished product lol thank you again!
Very helpful video Brother. THANK YOU.
Nice in detail with an explanation step-by-step play.
On our 2004 Corolla, the starter’s rear bolt was the more difficult to get to, but persistence paid off. About a 25 min. Project.
Thank you 🙂
I had to rap on the starter body with a ball peen hammer to get it loose, but it came right off. The hardest part for me was just getting the little rubber boot out of the way to refasten that last nut. I've changed several starters, but never on a Corolla.
Thanks!!!
Just did this, thanks to you. The far bolt was a stinker but I got it. Unfortunately, when I rinsed my battery in driveway with hot water, I got a stain on driveway. If you ever do that, take it to a parking lot.
Thanks for this video. I was able to replace my daughter's starter today by following this video. It was very well done.
So so helpful!
Was helpful finding position bolts
Loke him start over
Thank you for the informative and detailed video!! Changed my starter in less than 30 minutes!! Luckily I started vehicle & turned on AC. Found out I forgot to plug in electric fan. I'll be looking for more of your videos.