https://www.1aauto.com/rack-and-pinion-assembly/i/1astg00003?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=9At7tChYYvY
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, loose, or damaged rack and pinion. This video is applicable to the 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04 Toyota Camry or Avalon or Lexus ES300
🔧 Instructions:
1. Removing the Wheel 1:09
2. Removing the Outer Tie Rod 3:57
3. Removing the Power Steering Lines and Aligning the Steering Wheel 6:56
4. Removing the End Links 10:46
5. Removing the Steering Rack 11:33
6. Preparing the Steering Rack 16:06
7. Installing the Steering Rack 21:13
8. Reinstalling the End Link 26:34
9. Reinstalling the Outer Tie Rod 27:26
10. Reattaching the Wheel 30:16
11. Bleeding the Power Steering 30:35
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
best how to vid I've ever seen!
is there a difference between RH and Lhand driving ?
How to install a rack and pinion on Honda Civic 2001
appreciate it this videos guys….keep goinggggg!!!!
On mine the passenger side boot is busted, to fix this issue does it require an entirely new steering rack?
excellent video thks
Doesn't Toyota use ATF in the power steering instead of normal power steering fluid, or does it not matter?
Could youplease make a video of how to remove FWD subframe like toyota honda?
I've run up against the two 19mm mounting bolts. I'm gonna have to get the car up higher so I can fit a 24 inch pipe on my socket wrench. Like he says, it can be done on jack stands. But a lift makes it 10 times easier.
This video saved me hundreds of dollars and I learned so much. Thanks.. 1998 Camry 225K
Excellent video