Car Fix DIY Videos

Buy Now!
New Engine Mount from 1AAuto.com http://1aau.to/ia/1AEMT00480

This video shows you how to install a new engine mount on your 2007-2011 Toyota Camry. A shaking or vibrating engine, or bucking when changing gears are signs of worn engine mounts.

This repair was done on a 2007 Toyota Camry SE 2.4L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2007 Toyota Camry
2008 Toyota Camry
2009 Toyota Camry
2010 Toyota Camry
2011 Toyota Camry

Tools you will need:
• 19mm Wrench http://1aau.to/o6o/1AXAA00010
• 10mm Socket http://1aau.to/obtP/1AXAA00017
• 17mm Socket http://1aau.to/obQh/1AXAA00015
• 21mm Socket http://1aau.to/oau5/1AXAA00043
• Ratchet http://1aau.to/obTt/1AXAA00016
• Socket Extensions http://1aau.to/obQh/1AXAA00015
• Torque Wrench http://1aau.to/oaWT/1AXAA00044
• Block of Wood
• Gloves http://1aau.to/oaER/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oak7/1AXAA00068
• Jack Stands http://1aau.to/o83/1AXAA00065
• Pick http://1aau.to/oVH/1AXAA00037
• Pole Jack
• Rubber Mallet
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.