Car Fix DIY Videos

In this concise step-by-step guide, we’ll walk you through the process of resolving two common fault codes, P1983 and P0562, in your SUZUKI Wagon R AGS. These codes indicate issues related to system voltage and can lead to performance hiccups if left unchecked.

Follow these optimized steps to clear the fault codes and ensure your vehicle operates smoothly:

Safety First: Park your Wagon R on a level surface, engage the parking brake, and turn off the ignition.

Accessing OBD-II Port: Locate the OBD-II port, usually beneath the dashboard near the driver’s seat. Plug in your OBD-II scanner tool.

Diagnostic Setup: Turn the ignition to the “On” position without starting the engine. The scanner will power on; navigate to the “Read Codes” function.

Code Identification: The scanner will display the trouble codes. Note down the specific codes P1983 and P0562 for reference.

Code Clearing: Select the “Clear Codes” option on the scanner. Confirm the action when prompted. The scanner will communicate with your vehicle’s ECU to clear the codes.

Wait and Verify: Allow a moment for the codes to clear. You might see a “Codes Cleared” message on the scanner. Check if both P1983 and P0562 have been successfully removed.

Ignition Off: Turn off the ignition and unplug the OBD-II scanner.

Resetting the ECU: To ensure a fresh start, disconnect the vehicle’s battery for about 10-15 minutes. This will reset the ECU and erase any residual error codes.

Battery Reconnection: Reconnect the battery and tighten the terminals securely.

Test Drive: Start the engine and take your Wagon R for a short test drive. Observe the vehicle’s performance, ensuring that no warning lights reappear.

By following these simplified steps, you’ve successfully cleared the P1983 and P0562 fault codes from your SUZUKI Wagon R AGS. Remember, if the codes persist or reappear, it’s recommended to consult a professional mechanic to diagnose and address any underlying issues. Keep your Wagon R running smoothly and enjoy the journey ahead!