How to replace rear springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]

How to replace rear springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC]

How to replace rear springs / rear coil springs / rear suspension springs on SUZUKI SWIFT 3 (MZ, EZ) Hatchback 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 [TUTORIAL AUTODOC]

Top brands that produce springs: BLUE PRINT, KYB, MONROE, LESJÖFORS, SACHS.

📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036709825?pid=Youtube

On our website you will find a wide range of auto parts you are interested in: https://goo.gl/xAjEfr
Springs: https://goo.gl/VJ8CTo
Springs for SUZUKI: https://goo.gl/5BWDoH
Springs for SUZUKI SWIFT 3: https://goo.gl/nm68kh
SUZUKI Car parts: https://goo.gl/JUSR6R

🔔 Subscribe to AUTODOC’s channel and don’t miss new videos on car parts replacement ➜ https://www.youtube.com/c/AutodocUk?sub_confirmation=1

PDF How to replace rear springs on SUZUKI SWIFT 3 [TUTORIAL AUTODOC] — https://cdn.autodoc.de/uploads/man_pdf/suzuki/swift-3/rear-suspension-springs/EN-How-to-replace-rear-suspension-springs-on-Suzuki-Swift-3.pdf

00:13 — Raise the rear of the car and secure on supports.
00:22 — Secure the rear axle beam.
00:24 — Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.
00:47 — Carefully lower the trolley jack until the complete removal of the load from the spring.
00:56 — Remove the spring. Use a crow bar.
01:03 — Examine suspension spring rubber spacers. Replace them if needed.
01:10 — Install the spring.
01:28 — Secure the rear axle beam.
01:38 — Tighten the lower fastener of the shock absorber. Use a drive socket No.17.
01:48 — Remove the mounting from under the rear axle beam.

The tools you need to replace rear springs:
– drive socket No. 17
– crow bar

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:
► SUZUKI SWIFT 3 car repair tutorial — https://www.youtube.com/playlist?list=PLWep5LzT0sxnVRMGGMAq4zJ8shWlqQZpI
► How to replace front brake discs and front brake pads set on SUZUKI SWIFT 3 — https://youtu.be/aTFOJcc11ws
► How to replace front anti roll bar link on SUZUKI SWIFT 3 Hatchback — https://youtu.be/ZgH4_yu2ZP0

Mobile Shop: https://m.autodoc.co.uk

📢 AutoDoc in social media:
Facebook: https://www.facebook.com/autodoc.co.uk
Twitter: https://twitter.com/autodoc_berlin
YouTube: https://www.youtube.com/c/AutodocUk
Instagram: https://www.instagram.com/autodoc_autoparts

#autodoc #autodoctutorial

Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.

3,382
Like
Save


Comments

autodoc.co.uk says:

00:13 — Raise the rear of the car and secure on supports.

00:22 — Secure the rear axle beam.

00:24 — Unscrew the lower fastener of the shock absorber. Use a drive socket No.17.

00:47 — Carefully lower the trolley jack until the complete removal of the load from the spring.

00:56 — Remove the spring. Use a crow bar.

01:03 — Examine suspension spring rubber spacers. Replace them if needed.

01:10 — Install the spring.

01:28 — Secure the rear axle beam.

01:38 — Tighten the lower fastener of the shock absorber. Use a drive socket No.17.

01:48 — Remove the mounting from under the rear axle beam.

The tools you need to replace rear springs:

– drive socket No. 17

– crow bar

dejo095 says:

you should advertise more to attract more views. Excellent content for us noob diy's 🙂 also excellent webshop and offer you guys have, I'll be ordering from your store for sure even though I'm not from UK, but Im in the neighbourhood

Mickey Prajapat says:

It was not necessary to apply the new spring, if it was not necessary, the fact of the spring spring was increased only …

Saša Đokić says:

Врх ! ☺

Comments are disabled for this post.