How to replace rear brake pads on SUZUKI SX4 1 TUTORIAL | AUTODOC

How to replace rear brake pads on SUZUKI SX4 1 TUTORIAL | AUTODOC

How to replace rear brake pads on SUZUKI SX4 TUTORIAL | AUTODOC

Top brands that produce brake pads: BOSCH, STARK, SACHS, SKF, VAN WEZEL, VALEO, LuK, MAPCO, A.B.S., ATE.

📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036709825?pid=Youtube

On our website you will find a wide range of auto parts you are interested in: https://goo.gl/exJcv8
Brake pads: https://goo.gl/9fmOLs
Brake pads for SUZUKI: https://goo.gl/nF5ff3
Brake pads for SUZUKI SX4: https://goo.gl/ACRkG3
SUZUKI Car parts: https://goo.gl/xVnvu3

Mobile Shop: http://m.autodoc.co.uk

► How to replace spark plug on SUZUKI SX4 1 — https://youtu.be/yqsx2iW4Z9o
► How to replace front control arm on SUZUKI SX4 1 — https://youtu.be/8sl38s-7Iuo
► How to replace front stabilizer bar bushing on SUZUKI SX4 1 — https://youtu.be/DOf9aKNc8aw

📢 AutoDoc in social media:
Facebook: https://www.facebook.com/autodoc.co.uk
Twitter: https://twitter.com/autodoc_berlin
YouTube: https://www.youtube.com/c/AutodocUk
Instagram: https://www.instagram.com/autodoc_autoparts

#autodoc #autodoctutorial

Disclaimer:
This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury. AUTODOC strongly recommends being careful and adhering to the safety rules when doing any repair or replacement. Keep in mind that using low quality auto parts does not guarantee the proper level of road safety.

16,682
Like
Save


Comments

alameda748 says:

HI,SOMEBODY CAN'T TELL ME WHAT SIZE OR HOW MANY MM ITS THE CENTER CAP FOR THIS RIMS??I HAVE THE SAME RIMS SUZUKI SX4 2011 AND SOMEBODY STOLEN THE CAP ,I SEE ONLINE WELL I DON'T SURE WHAT ITS EXACTLY THE SIZE,I SEE 54MM ONLINE WELL I DONT KNOW THAT'S EXACTLY FOR THIS RIMS,

Nate A says:

Good video.
But you should have used silicone grease on the pins copper grease and the pad springs.

Francisco Sanhueza says:

Great video.. I want to try doing this for the first time pretty soon.. I don't have that special tool to adjust the brake caliper piston.. any suggestions?

FLESH HAMMER says:

Hello
What happend with the Disc rectication?

mo7 énergie says:

queles est le prix de motor de sx4??

Jamie Watters says:

Do you have to bleed the breaks if your putting new pads on???

Naaman Story says:

My SX4 goes to sleep every night and dreams of being as clean as that one. Regardless, great video, very helpful!

Craig D says:

How many foot pounds of pressure should be used when tightening down the bolts that were removed for this project? Should I use a low strength type of Loctite?

Craig D says:

To much the piston back to allow space for the new thicker pads I just used the old pad and the C clamp but either will work.

Comments are disabled for this post.