How to replace oil filter and engine oil on SUZUKI SWIFT 3 Hatchback [TUTORIAL AUTODOC]

How to replace oil filter and engine oil on SUZUKI SWIFT 3 Hatchback [TUTORIAL AUTODOC]

How to replace oil filter and engine oil / oil / motor oil on SUZUKI SWIFT 3 (MZ, EZ) Hatchback 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 [TUTORIAL AUTODOC]

Top brands that produce oil filter and engine oil: BOSCH, MANN-FILTER, CHAMPION, STARK, BLUE PRINT.

Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App — https://interstitials.onelink.me/1036709825?pid=Youtube

On our website you will find a wide range of auto parts you are interested in: https://goo.gl/1dmkvQ
Oil filter: https://goo.gl/U62NMJ
Oil filter for SUZUKI: https://goo.gl/WAHqyS
Oil filter for SUZUKI SWIFT 3: https://goo.gl/smp8B1

Engine oil: https://goo.gl/4CtAEd
Engine oil for SUZUKI: https://goo.gl/o9Gu5B
Engine oil for SUZUKI SWIFT 3: https://goo.gl/dEag5M
SUZUKI Car parts: https://goo.gl/uhqoGd

🔔 Subscribe to AUTODOC’s channel and don’t miss new videos on car parts replacement ➜ https://www.youtube.com/c/AutodocUk?sub_confirmation=1

PDF How to replace oil filter and engine oil on SUZUKI SWIFT 3 Hatchback [TUTORIAL AUTODOC] — https://cdn.autodoc.de/uploads/man_pdf/suzuki/swift-3/motor-oil-and-an-oil-filter/EN-How-to-replace-motor-oil-and-an-oil-filter-on-Suzuki-Swift-3.pdf

00:12 — Set the car at the service pit or lift it with a hoist
00:17 — Use a ratchet wrench. Loosen the oil filter
00:42 — Remove the oil filter
01:24 — Screw the new filter into its place. Use a ratchet wrench.
01:32 — Use a drive socket No.17. Use a ratchet wrench. Unscrew the drain plug
01:46 — Drain the used oil
01:57 — Set the drain plug in place and tighten it. Use a drive socket No.17. Use a ratchet wrench.
02:05 — Clean the area around the drain hole
02:12 — Open the hood
02:31 — Fill the engine with oil through the oil filler
02:56 — Run the engine for a few minutes
03:04 — Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary
03:20 — Close the hood

Was this video helpful? Give it a thumbs-up and share it with your friends!

Have a look at other videos on our channel:
► SUZUKI SWIFT 3 car repair tutorial — https://www.youtube.com/playlist?list=PLWep5LzT0sxnVRMGGMAq4zJ8shWlqQZpI
► How to replace front anti roll bar link on SUZUKI SWIFT 3 Hatchback — https://youtu.be/ZgH4_yu2ZP0
► How to replace front brake discs and front brake pads set on SUZUKI SWIFT 3 — https://youtu.be/aTFOJcc11ws

Mobile Shop: https://m.autodoc.co.uk

📲 AutoDoc in social media:
Facebook: https://www.facebook.com/autodoc.co.uk
Twitter: https://twitter.com/autodoc_berlin
YouTube: https://www.youtube.com/c/AutodocUk
Instagram: https://www.instagram.com/autodoc_autoparts

#autodoc #autodoctutorial

Disclaimer:
This video contains only tips and recommendations that can be useful to you in the course of car repair or replacement. AutoDoc shall not be liable for any harm, injury or property damage got in the process of repair and replacement due to incorrect use or misinterpretation of the given information. This video is for guidance only and does not guarantee a specific outcome. The user is personally liable for .incorrect or hazardous use of repair equipment, instruments or car parts. AutoDoc highly recommends to be careful and follow the safety rules during repair and replacement works. Keep in mind that exploitation of low quality auto parts does not guarantee the adequate level of road safety.

2,060
Like
Save


Comments

autodoc.co.uk says:

00:12 — Set the car at the service pit or lift it with a hoist
00:17 — Use a ratchet wrench. Loosen the oil filter
00:42 — Remove the oil filter
01:24 — Screw the new filter into its place. Use a ratchet wrench.
01:32 — Use a drive socket No.17. Use a ratchet wrench. Unscrew the drain plug
01:46 — Drain the used oil
01:57 — Set the drain plug in place and tighten it. Use a drive socket No.17. Use a ratchet wrench.
02:05 — Clean the area around the drain hole
02:12 — Open the hood
02:31 — Fill the engine with oil through the oil filler
02:56 — Run the engine for a few minutes
03:04 — Check the oil level 5 minutes after the stop of the engine operation using a dipstick and add oil if necessary
03:20 — Close the hood

Poyraz Saygın says:

T27 avensis istiyorum

Write a comment