Why the fuck would you install HID’s into your high beams?? Your safety
flasher trigger is no longer functional AND your pissing everyone off by
blinding them because you have HIDs in a halogen housing….dumbasses.
Any tips on how to get that little peanut bulb out above the projector? I
pulled the guages out and tired to lightly tug on the wires, like i’ve been
told on the forums, but mine seems wedge in pretty good.
this guy is a shit installer! skips the wire management part, just says to
watch out for steering? the spot you mounted this would not work if you
were to try to move the steering! sounds like he is in a tunnel with all
the echo..
can some explain to me how to install an led light kit for my 2006 gsxr
600. i am 18 and i installed the light under my tail and have the wires
near my brake lights. i know nothing about electricity and was wondering
how should i wire it in? i was guna wire it with the taillight so when
thats on my led light will be on, but which wires are for what? theres a
black blue with strip and green. i’d assume the black would be ground? help
would be much appreciated.
Just curious what “cable management” you used to keep the wires from
interfering with the steering dampener? Are there close up photos of your
install that show exactly where that ballast is attached anywhere?
){kind=link}
Why the fuck would you install HID’s into your high beams?? Your safety
flasher trigger is no longer functional AND your pissing everyone off by
blinding them because you have HIDs in a halogen housing….dumbasses.
MY DOG IZ GAY!!!
So do you need 3 kits with 3 ballasts to do all 3. I done this on my K7 but
only needed 2 kits. Don’t fancy squeezing another kit in there!
lol indeed wtf man..
Any tips on how to get that little peanut bulb out above the projector? I
pulled the guages out and tired to lightly tug on the wires, like i’ve been
told on the forums, but mine seems wedge in pretty good.
this guy is a shit installer! skips the wire management part, just says to
watch out for steering? the spot you mounted this would not work if you
were to try to move the steering! sounds like he is in a tunnel with all
the echo..
I knew more about it before watching this video.
this part is very tricky? -skip- just like that!?!?!?!
WHY ARE YOUR FINGER NAILS SO LONG BRO???? THEY ARE PRETTIER THAN MY
GIRLFRNEZ!!!!
Such a helpful video…………NAWT!
Would like to see where you put the ballasts!? All 3!?
good vid.. question.. i just recently installed a low beam plug and play
conversion kit as well.. but it apparently fried my ECM.. any thoughts?
Would have liked to see HIDs highs installed as well but this helps too,
thanks!
can some explain to me how to install an led light kit for my 2006 gsxr
600. i am 18 and i installed the light under my tail and have the wires
near my brake lights. i know nothing about electricity and was wondering
how should i wire it in? i was guna wire it with the taillight so when
thats on my led light will be on, but which wires are for what? theres a
black blue with strip and green. i’d assume the black would be ground? help
would be much appreciated.
i have a 2011 gsxr 1000 i put my low beam ballast behind the cluster but my
high beam i have no idea but i have a ddm tuning kit.
Thanks for putting that part up but how about running the wiring around and
what happens to the factory wiring?
Were can I just get a kit like that
@BL4STIN we are working on getting a video, and that we will have one
available as soon as possible
Just curious what “cable management” you used to keep the wires from
interfering with the steering dampener? Are there close up photos of your
install that show exactly where that ballast is attached anywhere?
i came here just to say this LOL!!