Finally got around to installing my IAG Performance Street AOS! When I get around to building the motor and tuning the car, I’ll convert the street kit to the competition version! I know it’s a long video, so below on the Pinned comment, so ***USE THE PINNED COMMENT AS A TABLE OF CONTENTS*** 🙂
Thanks for watching! Please comment below your questions and I’ll do my best to answer you!!
Follow me on Instagram!:
https://www.instagram.com/spacemonkeysti/
Music: DJ Grumble | https://soundcloud.com/gbeats | I have his permission to use his music
Instructions I followed (I reference both .pdf’s because the photographs were different due to my old bracket):
https://www.iagperformance.com/v/vspfiles/downloadables/instructions/IAG/IAG-ENG-7151/IAG-SS-AOS-08-14-STI-7151-v.01.pdf
https://www.iagperformance.com/v/vspfiles/downloadables/instructions/IAG/IAG-ENG-7151/IAG-SS-AOS-17-STI-7151-v.01.pdf
—————————————————-
){kind=link}
Couldn't fit this into the video description but use this as a table of contents!!!! 🙂 Thanks for watching!!!
—————————
1.
– @2:40 : Disconnect the battery with 10mm socket
– @3:29 : Remove hoses from oil line with needle nose pliers
– @3:54 : Remove intercooler. use 12mm socket.4 bolts total. 2 bolts mount the bypass valve to the intercooler. 2 hold the intercooler to a mounting brack. 1 of the bolts is block by sound generator tube. remove the sound generator tube (not sure what size socket you need).
– @4:25 : Loosen turbo and throttle body coupler clamps.
– @6:47 : Links to TurboSmart Couplers! https://www.rallysportdirect.com/part/universal-hose-couplings/tbs-ts-hs275075-bk-turbosmart-silicone-coupler-2-75in-black
https://www.rallysportdirect.com/part/universal-hose-couplings/tbs-ts-he90200-bk-turbosmart-silicone-elbow-90deg-2in-black
– @7:50 : remove oil breatherline from intercooler. 10mm socket
– @8:13 : Remove breather hoses (Passenger & Driver side). On each side there are 2 hoses next to each other. You are removing the ones that are closer to the front of the car on each side. Follow the hoses that were once attached to the solid oil breather line attached to the intercooler. Passenger side breather port is shown @9:20 & driver side is shown at @9:58
Very usefull video. Good job man. I was wondering if the hose that connects back to the intake manifold-throttle body, I noticed that that hose has something in the middle of it. Is that the PCV valve from IAG stuck in the middle of those two hoses?
Which turbo heat shield do you have?
how much oil did you have to add to it? and did you add more oil or after?
hey man love your videos! keep up the good work! did this help stop it from consuming oil?
Super late to the party, but did this fix your oil sipping problem? I'm having the same issue in my 05 sti
About to install this tomorrow. Thanks for the in-depth install!
I had my IAG AOS installed and it is seeping oil from the bottom edge of the unit. Any thoughts as to why it would do that?
Keep up the diy. This helped alot
Finally. I been looking for a good diy .
just installed mine yesterday, what a beast of a install. easy, just time consuming. great video
bro super helpful. ill watch it a few morw time to get my mind ready for the install. i also have instructions printed out. should be coming in, in the next few days. ill attempt a crap job document of me installing it. haha thanks for the helpful video.
Did you ever consider cleaning your engine bay before attempting this. It's a lot easier to find stuff and see if something is leaking. Just a thought. Good video though.
Hey, I know this is like 2 years late. Just got a CWP 2017 and just saw your Tomei exhaust vids. I believe you're in SoCal based on your vids, do you think I can hear the exhaust if its not too much to ask?