This is a video detailing the install of the Radium Catch can in an FR-S or BRZ. I chose NOT to do a can for the breather line on the naturally aspirated for…
This is a video detailing the install of the Radium Catch can in an FR-S or BRZ. I chose NOT to do a can for the breather line on the naturally aspirated for…
You must be logged in to post a comment.
){kind=link}
lmfao
All I know is it gives me 50hp boost, so fast.
The pistons with a cake of carbon.
The factory doesn’t install this due to the fact that its actually kind of bad for the environment, and requires a bit of extra maintenance, but it does trade off in adding longevity to the engine. It “catches” the oil going through the PCV line(gases that escape from the crank case that contain contaimenents), stopping it from ending up in the intake manifold, where its supposed to get re burned and used for combustion. Normally it gets re-burned and that’s bad for the engine because it coats
Well, you obviously don’t know what this is for.
Oh sweet, no more oil changes!
Great video’s…new to this DIY car upgrades..buying BRZ/FRS in spring, what’s the point of installing catch can..why isn’t this a factory installed thing?
great video
Is there anyway you could do a write up or somthing to that aspect of the nexus 7 interface. That torque app looks absolutely amazing i pick up my brz in march. And would seriously appreciate any help at all if you don’t mind. Scott83944@gmail.com. Thank you!!!
You should do a video of you emptying out the can, once it gets to that point.