Buy Now!
New Master Power Window Switch from 1AAuto.com http://1aau.to/ia/SUWES00001
1A Auto shows you how to repair, install, fix, change or replace a damaged, worn out, faulty or shorted power window switch. This video is applicable to the 05, 06, 07, 08, 09 Subaru Outback.
🔧 List of tools used:
• Phillips Head Screwdriver http://1aau.to/oyP/1AXAA00013
• Trim Tool Set http://1aau.to/oey/1AXXX00004
For More Info visit us at http://1aau.to/h/Zt/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Followed step by step, everything came out properly and then back in. Wonderful video!!
Thanks for the detailed video and instructions. Took me and my son 10 min to take the door apart and install the window switch. I didn’t even need to remove the door lock cables.
Is this possibly the problem if the driver window doesn't work? Buzzes when button pushed or pulled, and all other buttons on driver door and on all doors do not roll windows up or down… But no noise from them
looking for a video for replace mirror adjustment switch 05-09 subaru outback
I have only a driver's side window switch that broke. All other functions on the panel work. Are you replacing the entire array of the driver's side window switches as one unit?
Thanks to the video I may have gotten this repair done faster than the video and saved myself a lot of money.
I had one issue after installation where the lock activation kept cycling the locks. It stopped happening after cycling the factory alarm system.
Would it be a similar process on a liberty?
Thank you VERY much.
My switches worked and failed worked and failed.
Turns out they didn't fully seat the connector when they replaced the switch set.
Saved me a trip back to the dealer
Thanks for sharing this – really came in handy when I had to replace the switch on my wife's Subie.
I'm confused. You showed how to take it apart and then just put it back together again. Where did you replace the switch?
Very Good Video! This is like having an older brother to watch only you didn't destroy anything.
Thanks for this video, I'm parting out my Subaru, this was a nice reference.
Very well done video. One recommendation,………. cut video length when possible. FF thru screw extractions, etc.