Car Fix DIY Videos

Buy Now!
New Engine Block Heater Kit from 1AAuto.com https://trq.video/id-SUZWH00001

This video shows you how to install a engine block heater on your 2010-2014 Subaru Outback.

This repair was done on a 2012 Subaru Outback 2.5i 2.5L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2010 Subaru Outback
2011 Subaru Outback
2012 Subaru Outback
2013 Subaru Outback
2014 Subaru Outback

Tools you will need:
• Phillips Head Screwdriver https://trq.video/obFF-1AXAA00013
• 12mm Socket https://trq.video/ob5Y-1AXAA00015
• 27mm socket https://trq.video/oat-1AAST00007
• Coolant Funnel Set
• Push Pin Pliers
• Air Chisel
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet https://trq.video/obFE-1AXAA00017
• 3/8 Inch Drive Ratchet https://trq.video/ob5Y-1AXAA00015
• Gloves https://trq.video/oa3d-1AXSS00048
• Safety Glasses
• Wire Ties
• Chisel https://trq.video/onc-1AXAA00055
• Drain Pan
• Floor Jack https://trq.video/oawt-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oaiu-1AXAA00065
• Punch
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

Check out our playlist:
Subaru Outback 3rd Generation 2010-2014: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-dW1LK3u7qNsNk0rPK_kIY

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.