This shows how to remove the drive belt (aka serpentine belt) on a 2002 Saturn L200. You’ll have to remove this belt before removing the alternator or AC com…
How to Remove the Serpentine Belt on a Saturn L200
0
Like
Save
){kind=link}
Comments
Write a comment
You must be logged in to post a comment.
Additional notes, unplug the wiring to the A/C line sensor to avoid
breakage when pulling up on either breaker bar or extended ratchet. Lastly,
the airbox slides toward the firewall and then lifts out after loosing hose
clamp by the Throttle body and unclamping the rubber hose. Thanks.
Hi John, I would recommend your revising the video…removal of the belt
requires less steps and does not risk damaging the pulley or tensioner
bracket. First the car does not need to be jacked up. Simply remove the
airbox by removing the 10mm bolt, unplug the A/C sensor, the tensioner
bracket has a 3/8 inch square built into it to attach either a breaker bar
or extended 3/8 inch ratchet. Insert ratchet and pull up releasing the
tensioner and belt without damage to pulley or body work.