Richpin06, Thanks for this and all of your other Saturn video’s! I have a
question for you concerning the stabilizer bar bushings. Can the brackets
holding the bushing/stabilizer bar be removed, one at a time, to replace
the bushings or does the bar have to be completely removed first? Thanks!
richpin06 service videos most on domestic cars,namely, saturns car,s eric
the car guy on foreign cars namely honda and acura’s great videos both of
them!!
Hey Rich you have been changing parts on that car in just about every
video, maybe it is time to upgrade to something LOL, just kidding , if you
were to get something new there would not be anymore videos!!!!!are you
going to make one on the fender replacement? i will wait and see! later
dude..J.
Good Vid Rich, I found on my 00 SC@ I was able to do the bar without taking
the control are out tho. It was a tour but to get it back in was pretty
simple, get one side in the arm and befor bolting it to the sub-frame just
get a pry bar against the rim and pry the bar into the other arm….I also
had the car on a hoist tho,
Thanks for the great video, I also live in a cold and snow belt but in
Winnipeg, Manitoba, I wasn’t sure My Stabilizer bar needed changing until
the snow and ice came and now find it difficult keeping in my lane, other
symptoms were when turning I’d hear a popping, clunking noise and suspected
a ball joint and replaced that but the problem persist, a little online
research points to the sway bar, it’s going to warm up to minus 6 this
weekend and that’s when I’m changing it
@richpin06a 1995 to 1999 eagle talon, if you have a neighbour, maybe a
friend that has a son with one or relative. These cars a cursed by this and
strut towers also. Its due to wet and winter climates mostly its road salt.
Should similar to other cars also,
Nice job, Rich. How do you get a constant flow of Saturn vehicles to
repair? It’s kinda cool that you can specialize as a general mechanic in
private practice.
Hi Richpin, Happy Holidays I hope all is well with you and the family. Was
wondering if you could do a video on replacing a Saturn sl1 2001 rear
stabilizer bar link. Saw a moog brand on Rock auto for half the price
selling at a local Advance auto. Thank you in advance for all you do.
Those blasted lower control arm to subframe bolts are not coming out for
me. It spins and rubber bits are coming out! Major seizure. Air hammering
does nothing…what next?
Hammer to work on car = doing it right
Richpin06, Thanks for this and all of your other Saturn video’s! I have a
question for you concerning the stabilizer bar bushings. Can the brackets
holding the bushing/stabilizer bar be removed, one at a time, to replace
the bushings or does the bar have to be completely removed first? Thanks!
Great Video. Saturn really seems to have done things different than other
makes. Engineering seems to be simpler than Hondas etc..
Sorry fender indeed, wing in the UK
@Carfixing101 Sorry, no.
Excellent video Rich but whats the wings made from plastic?
@richpin06a Lol but no. Its because I live in the snow belt region.
Hello from MA
Good video, cool accent. Hello from IL
Hi, Is it advisedly to grease rubber bushing holding stabilizer?
richpin06 service videos most on domestic cars,namely, saturns car,s eric
the car guy on foreign cars namely honda and acura’s great videos both of
them!!
Hey Rich you have been changing parts on that car in just about every
video, maybe it is time to upgrade to something LOL, just kidding , if you
were to get something new there would not be anymore videos!!!!!are you
going to make one on the fender replacement? i will wait and see! later
dude..J.
@TOMOFONO No, the metal bushing and bolt are seized good. Rubber bits
everywhere and no movement.
Good Vid Rich, I found on my 00 SC@ I was able to do the bar without taking
the control are out tho. It was a tour but to get it back in was pretty
simple, get one side in the arm and befor bolting it to the sub-frame just
get a pry bar against the rim and pry the bar into the other arm….I also
had the car on a hoist tho,
Getsaturnparts still have a listings for them.
Thanks for the great video, I also live in a cold and snow belt but in
Winnipeg, Manitoba, I wasn’t sure My Stabilizer bar needed changing until
the snow and ice came and now find it difficult keeping in my lane, other
symptoms were when turning I’d hear a popping, clunking noise and suspected
a ball joint and replaced that but the problem persist, a little online
research points to the sway bar, it’s going to warm up to minus 6 this
weekend and that’s when I’m changing it
The angle of the bar prevents it from being removed till one of the arms
are off.
Love your videos Rich, Keep it up!
thank you so much!!!!
@richpin06a 1995 to 1999 eagle talon, if you have a neighbour, maybe a
friend that has a son with one or relative. These cars a cursed by this and
strut towers also. Its due to wet and winter climates mostly its road salt.
Should similar to other cars also,
Thank you I look forward to it. Your kindness is exceeded only by your
mechanical knowledge and your ability to present it to us.
Hey, Rich can you do a video in near future of replacing the Lower Radiator
support.
@414Dre Thank you for sharing that.
Hey Richpin. Can you buy all the bushings to fix a control arm yourself or
do you have to buy new control arms
First
@richpin06a Good idea, show me how to replace my rachet straps with the
actual fuel tank straps.
Happy Holidays to you.I will put it on my video to do list thank you for
being a loyal viewer.
is that your car rich
@hp11208 No it is not.
@DALE97DSM So stay away from 95-99 talon
@CHIBA280CRV No fender video but i have a fuel tank strap video coming
tomorrow.
@axenz1 Dry would be best
@TOMOFONO You can not get the bolt to move side to side at all?
Car seems like a bit of a beater at this point. Why not just live with the
body roll? I like your tool creation videos BTW.
Nice job, Rich. How do you get a constant flow of Saturn vehicles to
repair? It’s kinda cool that you can specialize as a general mechanic in
private practice.
@winterskysteve Are you talking about the fender.
Why did you have to take off the control arm?
Yes those bushings are out there.
Hi Richpin, Happy Holidays I hope all is well with you and the family. Was
wondering if you could do a video on replacing a Saturn sl1 2001 rear
stabilizer bar link. Saw a moog brand on Rock auto for half the price
selling at a local Advance auto. Thank you in advance for all you do.
Those blasted lower control arm to subframe bolts are not coming out for
me. It spins and rubber bits are coming out! Major seizure. Air hammering
does nothing…what next?
@winterskysteve On the Saturn S-series the fenders doors and quarter panels
are made from plastic.
Hey!! Great Video!!! Where can i buy the Sway Bar and the Kit? #I need my
car fixed by the end of the week 🙁
@DALE97DSM What vehicle.
I love your videos, man. Keep up the great work! 😀