Car Fix DIY Videos

Buy Now!
New Crankshaft Position Sensor from 1AAuto.com http://1aau.to/ia/1AECS00085

This video shows you how to install a crankshaft position sensor on your 2005-2010 Pontiac G6. The crankshaft position sensor is an important component of any electronically controlled ignition system. The sensor provides the computer with data about the position of the crank shaft to properly adjust ignition timing. If the sensor in your vehicle is broken or malfunctioning, you may suffer poor performance, or get a check engine light.

This process should be similar on the following vehicles:
2005 Pontiac G6
2006 Pontiac G6
2007 Pontiac G6
2008 Pontiac G6
2009 Pontiac G6
2010 Pontiac G6

Tools you will need:
• 10mm Socket http://1aau.to/oa/1AXAA00017
• 13mm Socket http://1aau.to/oa/1AXAA00015
• 15mm Socket http://1aau.to/oa/1AXAA00015
• 8mm Socket http://1aau.to/oa/1AXAA00017
• Pliers
• Socket Extensions http://1aau.to/oa/1AXAA00015
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Cloth Rags http://1aau.to/oa/1AXSS00035
• Engine Oil

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.