How to replace door speakers on most vehicles. Pontiac Grand Am example. Be sure to watch the door panel removal vid. Please subscribe and thanks for watching!
How to replace door speakers on most vehicles. Pontiac Grand Am example. Be sure to watch the door panel removal vid. Please subscribe and thanks for watching!
You must be logged in to post a comment.
')){kind=link}
On most cars you do. I believe so on that one also.
do you have to take the door panel completely off to change the door speakers out?
a pontiac grand prix 2000 model//
I’ve been outta of it so long it’s hard to say. When I was competing in sound-offs you could not get a better head-unit than Alpine.
in your opionion what is the best brand of stero? to buy ie sony, JVC ect
You can just get some terminal connectors and crimp them on. They are available at just about any hardware store, radio shack, etc..
how would you complete an install without soddering? or having to use the factory speaker bracket when speak is glued to it. thankyou!
Just have to run a new wire from the radio to the speaker.
what if i wanted to replace the speaker wire
yeah
im the same way i solder on the old harness to my speakers to.
I’m sure it’s a little different but the same idea.
is this the same for a g6 2006
@sonicreactiontv no you dont have to disconnect the battery, just have the car off
How much did the speaker cost its cool
I have to disconnect the battery right?
You can check them on Crutchfield.
eBay, don’t remember how much.
And I got a 1992 Nissan sentra and I really dont know how to find out the size
Wer did u bie these speakers and how much
You can crimp on connectors.
Do you have to have a soldering gun to do this or can it be done some other way? Plz answer, thnx
Usually not..
cant i put these bad boys in without the door panel removal?
LOL… Thanks. Yeah, it’s good to learn that’s for sure!
You are nice. I told my dad I wanted to upgrade my speakers. He just said good luck. Wanted me to learn it by myself. It’s pretty easy to do. He’s upgraded stereos in all his cars so he’d help me if I got into a jam
Honestly not sure. My guess is that maybe the car has a factory amp of some sort or a crossover built in. It could be wired in series or parallel with another speaker even. Still doesn’t explain 5 wires really though.
i have a 1990 dodge spirit and the speaker has 5 wires going to it. i have never seen this before. all the speakers have crapped out over the years except one but it sometimes crackles. i think its time for new speakers. so do i have to buy a special speaker have you heard of this before?
or just cut the wires…
Get a cheapo from Home Depot. Less than $20
I dont have a soldering gun…. 🙁
@100karrilon LOL.. True!
Cool!
Didnt have any depth issues. I didnt remove the factory baffle…just trimmed it so the new speaker magnet would clear it. Now have nice 6″s where the 4×6″s were. Had to use a 1″ ring spacer on the door panel. Sound quality is much nicer now! =)
5 1/4 or 6 1/2 with a adapter plate they sell at Crutchfield
i just got a 1997 chevy silverado, do you have any idea of the speaker size in the doors?
i helped my friend out new speakers in his dodge neon and the wire colors where, blue and purple, and plue and orange..We Figured it out..but really
Should be 4×6 in the doors and 6×9 in the rear deck if it’s a coupe.
hey do you know what size speakers are in a 2001 pontiac grand am se??
@jaybee15100 Yeah, my stepdaughter. My wife has 4 years on me so I have older kiddos.
Usually they can be removed but typically what you run into is they are really close to the door glass. Sometimes, not all the time, a 4×6 will only work because of the depth. 6.5 are deeper and may interfear with your window.