Disabling the immobiliser!
Peugeot 106 immobiliser
4
Like
Save
){kind=link}
- Tags:
immobiliser, peugeot
- Categories: Peugeot
Comments
Write a comment
You must be logged in to post a comment.
Disabling the immobiliser!
You must be logged in to post a comment.
Thank you so much for this.
It worked like a dream.
Cheers!
No it won’t. you cannot directly feed the stop solenoid on S2 models without removing the immobiliser circuit board from the fuel pump. 🙂 you can only do that on S1 models.
Diesel? Run a wire to the stop solenoid from the battery (better still, a live ignition feed). Problem solved 🙂
Any idea how i start my 106D in the 1st place ?
work on my 106, mk1, 956cmc, 94′. Thank you for this information!
i have the same problem with p 106 the code is blocked how can i disable him my car won t start …
You’d be surprised who would want to steal said car…. It has no battery when I don’t use it 😀
Love the way you don’t film entering the code. Who’s going to steal it haha ;)
Exact same procedure
If anybody knows how to do this on a 406, please tell me how 🙂
I’ve got the same car (the steering wheel on the left side). I just wanted to make sure there is no wireless immobiliser. So I can copy my (plain)keys easily. Thanks.
Just a plain key, so technically could be hotwired. There was a code on the keypad (didn’t want to film that :P)
This could be useful someday, thanks 🙂 Do you have any immobiliser in your key which you were starting with? Or is it just a normal key without any electronic inside?
Start the car as normal with the key pad. As the car is running, remove and disconnect the keypad. By doing this you are permanently disarming the immobiliser. The car should start as normal without any keypad 🙂
how did u do this????? plz reply