How to change a head gasket (Peugeot 1.4 petrol)

How to change a head gasket (Peugeot 1.4 petrol)

In this video we show you how we changed a head gasket that was leaking oil in a coolant system, this is not a toturial since this is our first time doing this, but since we did it and it wasnt that hard we decided to make a video with few tips.. Enjoy

16,166
Like
Save


Comments

George Conejos says:

Hi guys i have a same issue, the oil have in colant, and have overheating issue, my quation is it is possible in gasket problem?

John Wayne says:

Mine has a little bit oil in the airbox ! What is the problem ? Engine runs normal

Animo City says:

hello is this the same l4 8valve engine that was used in 97 peugeot 306? i heard its most common issue with this engine

D4N13L says:

Hi Guys, I have 2011 Peugeot 207 1.4 petrol. I have oil in coolant but not coolant in engine oil. What do you think , do I have oil cooler problem or still have Head gasket ?

mark swanzy says:

can you tell me what the tightening sequence is for the Peugeot 207 petrol?

Sam Smith says:

Buying a 106 from auction should I consider it if it says needs a new head gasket??

halku55 says:

Could you do mine aswell?

Harry Esteves says:

Is this the 8 valve engine?

Harry Esteves says:

Is this the 8 valve engine?

Cristian CRS says:

Great job, i saw that when you removed the gasket, it was on one side ,and when you fitted the new one, it was on the other side, it makes any difference? I am asking because i bought a new head gasket by original code and the silicone guard is fitted on the opposite side of the original one. (i hope that you get what i am trying to say). Thank you!

Indra Verma says:

Sir we a old mahindra jeep mm540 with Peugeot engine….2months before its headgasket burned….so we are opening the head but in between the head's 4 main bolts are broked so what can we do and its a aluminum header the bolts are stucked….and the header is not remove from approx. 30years….what can we do now?please gives us idea

Isy and Paris lavery says:

Hi there how did you lock the engine up got the pins can't find the hole have a peugeot 207 1.4 2010 petrol thanks

Jay Kent says:

Guys, great work and thanks for posting but shouldn't the head bolts have been replaced as they are stretch bolts and are a one time only use?
Regards Jay

fox8602 says:

How long time did it takes to you? Thx!

dot says:

What did u use to wash oil away from coolant system?

Comments are disabled for this post.