Front suspension lower arm replacement

Front suspension lower arm replacement

How to replace a front suspension lower arm on Peugeot 206. Step by step. lower arm ball joint silent block.

This video does not constitute or replace a real specialized technical manual, and was only made ​​for convenience and educational purposes. “TutoBuild Eng” makes no warranties of any kind and accepts no liability. “TutoBuild Eng” cannot be held responsible for any damage caused to devices or persons using information contained in this video. The use of the information contained in this video is at your own risk.

203,491
Like
Save


Comments

sichere says:

Tip – Leave the nut on before you hit the bolt to free it = It will save on damaging the thread

As entertainment says:

Meri car i10 ka suspension kiase sahi hoga

Lance Cole says:

Very helpful thank you

Darath Ny says:

This has to be a comedy

Justin Holmes says:

What a brute !

Brenig James says:

Thanks for a very informative instruction video. You just saved me a huge labour charge. 😉 and I'm not a mechanic at all.

Andrew Snowden says:

Hi, could you please tell me what kind of torx you are using (E?) Thanky you very much!

peter schutten says:

Wat een monteur

вадя уруля says:

мне понравилось!

Marcos Antonio Pellegrinello says:

Very nice your vídeo!!

Dave Davids says:

I can highly recommend using a lashing and jacking up the wheel hub if you want to get the ball joint back into the lower arm. It pulls the shock absorber back in place and reduces the angle of the ball joint to the lower arm. Otherwise you can be busy for hours and hours, getting absolutely nowhere. It looks so simple on the video, but I just finished the job, took me 2 days fighting with the lower arm before it was back in place. Finally the lashing got it done in 10 min.

Olvin Abarca says:

do not hammer the bolts!

Kevin Manley says:

Are you a professional mechanic or a DIYer. Reason I ask is that you have just about damaged every thread you had to undo. Ever heard of using a softer material than you are impacting ??? also that is a ball joint splitter not a pry bar so why not learn how to use the tools. Your knowledge of what to do is accurate but if you are typical of what we pay garages £60 per hour labour for in local garages then god knows what we are training our apprentices this day and age.

Antonio Palmero says:

Hi, great video
Can you tell me which torque, in each bundle
thank you very much for your attention
Best Regards.

dlf qka says:

나레이션 여성분 목소리좋아서 영어공부용으로 보고있어요.. nice
ps: 자막좀 더많이해주심면 안될가요?

hribc78 says:

these are a bitch to get off. i always end up busting the ball joint

Write a comment