If you have found this video helpful, and you wish to donate to me, follow this link!! its easy!!
https://paypal.me/aaronhinesauto?locale.x=en_US
Follow this channel on twitter for the latest content updates and weekly Automotive Tips!!
https://twitter.com/AutoHines?lang=en
In this video I show the steps and procedures necessary to replace The thermostat I need 2005 through 2018 Nissan frontier And Nissan Xterra. The same procedures taken Nissan frontier is well with the vq40de engine (v6). If this video helps you out please like and subscribe and don’t forget to leave a come as well thank you. P.s. Sorry about some of the videos air in the wrong aspect ratio I was in a hurry to make it
Thank you very much
Good job man
At 6:44 that pipe can be fragile from age and heat and break, leading to more work.
Wonder why they don't have bleeder screws? They come in handy.
i don’t have the p code but he ctruck coolant over flowin the reserve
What the he double hockey sticks that's the thermostat never seen 1 like this and I've done so many well still love my x
I wouldn't mess with the steam line, on .y Frontier it was brittle plastic and I ended up having to replace that hose as well, the new one I picked up was at least metal
Do you need to drain the coolant?
So I got a fluctuating temp and my hot air takes a while to get warm. But I don't have a check engine light. Possibly my Thermo is going out? Has 81k miles
Super helpful video with excellent clear instructions! Thanks for the help and for the tips and tricks about burping the system.
Do you have a video on how to replace that hose that you removed to bleed the system? The jar was cracked so I had to replace it. It came with that hose but I couldn't get it off because It was pinned under the fuse box which I couldn't figure out how to remove. I'm also surprised you were able to remove that hose without breaking that plastc barb on that little canister looking piece going into the firewall. It crumbled when I tried to wiggle the hose off. I had to replace heater hose assy across the firewall, but lucky NAPA's replacement was Aluminum. Much better part than factory!
Thanks. I just changed mine
hey Arron nice video. watched other videos showing shroud and fan removal for easier access to thermostat. l have 2012 Pathfinder. Can I do it the way you show. looks easier your way. thanks Neil.
Gonna attack nephews 2008 frontier truck tomorrow on the thermostat, hopefully that's what was causing the overheating problem.
Single der 2016 Frontier worried. About being ripped $ light just came on any ideas where to go to fix it Vail az