How to Replace Serpentine Belt 06-12 Nissan Altima

How to Replace Serpentine Belt 06-12 Nissan Altima

Shop for New Auto Parts at*/c/192?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=tLtcqokD5cE

In the video, 1A Auto shows how to remove and replace a slipping, squeaking, or broken serpentine belt. The video is applicable to the 06, 07, 08, 09, 10, 11, 12, Nissan Altima

🔧 List of tools used:
• 14mm Socket
• 21mm Socket
• Serpentine Belt Removal Tool
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench

For More Info visit us at

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



j young says:

You do NOT have to take off the wheel/tire. You can turn all the way to the right and remove panel if you don’t want to mess with a jack and such. The replacement belt we got from autozone was so tight it would hardly go over alternator once tension pulley was completely compressed. Got over the alt. Lip barely, cranked car and it jumped in place. Thanks for the video, was helpful tool sizes .

Lastinline says:

I’m about to install one on my daughters car today, I will let you know how it goes.

Alex Hauptli says:

I found that by placing the belt on A/C last instead of the Harmonica Balancer, it was WAY easier. The HB has the belt seated farther back and much harder to get to last.

Mrz Wade says:

What is the code on that serpentine belt used in this video? I have a 2013 nissian Altima 2.5l with electronic power steering I need a belt that fit

Coketown says:

No link to the serpentine belt tool used in the video… I want it

arnhay says:

Awesome work buddy!!!!!

Comments are disabled for this post.