How To Replace Rear Wiper Arm 2008-20 Nissan Rogue

How To Replace Rear Wiper Arm 2008-20 Nissan Rogue

Buy Now!
New Wiper Arm & Blade Assembly from

If your rear wiper arm is broken, or stripped out, you can replace it with a new one from TRQ yourself. This video shows you how to install a new rear wiper arm on your 2008-20 Nissan Rogue.

This process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• 12mm Wrench
• Cloth Rags
• Wire Brush


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



TRQ says:

Watch the Video

Buy The Part at 1A Auto

Do it Yourself

Save Money

PoshLady Terri says:

Thank you! This saved me some money for sure! YouTube University is the best!

Rick Rowe says:

Couldn’t get the arm off either. I ended up removing the old rubber and slid on the new one. Be careful not to let the metal reinforcement bands on the rubber slip or fall off

Mealz007 says:

Need a 12mm wrench to remove the old wiper arm.

ItchyKneeSon says:

Awesome. Same as my '06 Pathfinder r51. Thanks!

kari doughty says:

Mine wont come off! Any tips/recommendations?

GT 43 says:

Thanks for the vid. I knew those damn little plastic covers were supposed to pop up but I couldn't get them to at all, but for some strange reason after watching your video I went back out and they just came right off with no problem.

Sarah Jane says:

So the metal ring that sits inside the wiper arm has come away from the wiper arm. So when I wiggle it just the plastic is moving. How do you suggest I get it off? Can't get the old arm off! Lol

Patrick Estrada says:

Has anyone else had trouble breaking the nut loose?
I'm going to use heat on it but just want to make sure there isn't some weird trick that I need to do first.
Used penetrating oil last night but it wouldn't budge.
Thank you

David Stephens says:

Perfect! Video was super helpful, bought the assembly from you also, fast delivery. Getting the old rusty nut off was hard. I used a heat gun to get it up to about 200F and that freed it right up.

S Browne says:

Love how you zoomed in showing what was being done.

Kyle F says:

My arm is rusted on. I got the nut off but there's nowhere to get any extra leverage without damaging my car. I already dented it even with protection. Penetrating oil does nothing. How are you supposed to get it off?

jianxia dong says:

Where can I buy a new wiper

Christian Howland says:

Hey I have a question. My bold that I put the arm on is totally different and don’t fit. Is there a different arm to use ?

Karole Tanner says:

I’ve purchased my replacement but can’t seem to get the old one off. It wouldn’t just wiggle off … any suggestions?

IgMfJroopy says:

Jp out here in north west uu

Comments are disabled for this post.