Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASRU00027
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged rear upper control arms. This video is applicable to the 02, 03, 04, 05, 06 Nissan Altima.
🔧 List of tools used:
• 17mm Wrench http://1aau.to/toe/1AXAA00010
• 19mm Wrench http://1aau.to/toe/1AXAA00010
• 21mm wrench
• 17mm Socket http://1aau.to/t95/1AXAA00015
• 19mm Socket http://1aau.to/tpn/1AXAA00043
• 21mm Socket http://1aau.to/tpn/1AXAA00043
• Needle nose pliers http://1aau.to/tiG/1AXAA00051
• Needle nose pliers http://1aau.to/tiG/1AXAA00052
• Side Cutters
• Vise Grip Pliers
• 1/2 Inch Breaker Bar http://1aau.to/tfX/1AXAA00078
• Ratchet http://1aau.to/t4a/1AXAA00016
• Socket Extensions http://1aau.to/t95/1AXAA00015
• Torque Wrench http://1aau.to/tnF/1AXAA00044
• Rust Penetrant
• Center Punch http://1aau.to/tbF/1AXAA00055
• Floor Jack http://1aau.to/toc/1AXAA00068
• Jack Stands http://1aau.to/tos/1AXAA00065
• Pick http://1aau.to/tew/1AXAA00037
For More Info visit us at http://1aau.to/h/a9T/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
What about the other side??? There is no gap like between the gas tank and frame on that side?
I wish they had more replacement videos for newer cars. I have a 2016 Altima and there aren't many videos
My new control arm doesn't have the cone thing on the ball joint.do you have to transfer it or something?
I think before I start it would be easier if the shock was out to give more room.
my nissan maxima 2004 its more complicate or the same
Dang! The rear is much more complicated to replace than the front and how much more if you don’t have hydraulic lift.