Buy Now!
New Wheel Bearing Set from 1AAuto.com http://1aau.to/ia/1ASHS00971
This video shows you how to install new TRQ front wheel bearings on your 96-04 Nissan Pathfinder. Head over to TRQAutoparts.com for more information.
• Check here for more videos on the 1996-2004 Nissan pathfinder: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8lOw7uWVcakLTaVRrmXbtV
This process should be similar on the following vehicles:
1996 Nissan Pathfinder
1997 Nissan Pathfinder
1998 Nissan Pathfinder
1999 Nissan Pathfinder
2000 Nissan Pathfinder
2001 Nissan Pathfinder
2002 Nissan Pathfinder
2003 Nissan Pathfinder
2004 Nissan Pathfinder
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oa/1AXAA00013
• Pry Bar http://1aau.to/oa/1AXAA00020
• 13mm Socket http://1aau.to/oa/1AXAA00015
• 21mm Socket http://1aau.to/oa/1AXAA00043
• 22mm Socket http://1aau.to/oa/1AXAA00266
• 32mm Socket http://1aau.to/oa/1AAST00003
• Brake Caliper Hanger http://1aau.to/oa/1AXAA00084
• Dead Blow Hammer http://1aau.to/oa/1AXAA00091
• Snap Ring Pliers
• 1/2 Inch Air Impact Gun http://1aau.to/oa/1AXAA00252
• 1/2 Inch Breaker Bar http://1aau.to/oa/1AXAA00078
• Ratchet http://1aau.to/oa/1AXAA00016
• Torque Wrench http://1aau.to/oa/1AXAA00044
• Bearing Grease
• Block of Wood
• Brake Grease
• Brake Parts Cleaner
• Cloth Rags http://1aau.to/oa/1AXSS00035
• Marker / Writing Utensil
• Sandpaper
• Center Punch http://1aau.to/oa/1AXAA00055
• Hammer http://1aau.to/oa/1AXAA00091
• Pick http://1aau.to/oa/1AXAA00037
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Nissan Pathfinder 1996-2004 Second Gen: https://www.youtube.com/playlist?list=PLJVpHWuCEUX8lOw7uWVcakLTaVRrmXbtV
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Where can I get that axle nut socket with two pins??
Thank you for the video! Can you please give me the specs for the axle socket? And maybe a part number? Thanks!
I cant find if you showed it but there are 2 bearings, the inner and outer bearings, that were replace right?
I went to the shop today for my Nissan pathfinder 2001 cost me $383 to do what you just did plus all the parts and labor
I wach your video and how profevional you do the job I like the way you explain every move you make very good teacher I have a 1999 pathfinder and need to change the rotor but when I see those old bering I back out now that I saw you foing it I think I going to try the only thing I don't know how to set the to lbs torke Im going to vhang myself see if work thank to you to explain so good.
Link for that axle socket?
Good to see someone who knows to do it wright….
Wow great video but a lot of work and places where to make mistakes. But great detailed video. I will try to see if I can do the job.
Great video! Off to the garage i go.
So what did you knock off of the wood and into the bearing cavity? Saw dust?
What grit sandpaper/emory do you use for the race mating surfaces?
Can you please tell me where I can find a video that is on a 2001 QX4 to change the front wheel bearings I can't find one nowhere doesn't anybody own one anymore
Nissan navara d22 torque says 1.5nm???
Where can I buy the tool from? (axle socket).
Great video. Is the 04 frontier the same ?
Does the kit linked in the description include all the seals and such used in the video?
i just did this with my nissan and i have alot of misc parts in the middle to get the spindle nut, i put everything back together and it seems that when the hub cap is on there is some drag, anyone have any suggestions?
I’m a broke pool guy who drives a 2001 Nissan Frontier. Thank you for helping me get back to work man
Great video, sticks to the point and clear. Well done bud, thanks. Is this the same set up as the D22 ?
Where is a good source to get the torque specs?
This is a great video thank you
Very Professional and DIRECT. I am for sure a new SUB and will be reading you. Thanks for what you're doing.