Car Fix DIY Videos

Buy Now!
New CV Axle Assembly from 1AAuto.com http://1aau.to/ib/1AACV00434

This video shows you how to install new front CV axle assemblies from TRQ on your 2012-2018 Nissan Altima. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• Pry Bar http://1aau.to/o3X/1AXAA00020
• 18mm Wrench
• 21mm wrench
• 10mm Socket http://1aau.to/obvx/1AXAA00017
• 18mm Socket http://1aau.to/oavS/1AXAA00043
• 19mm Socket http://1aau.to/oavS/1AXAA00043
• 21mm Deep Socket http://1aau.to/oavS/1AXAA00043
• 32mm Socket http://1aau.to/odz/1AAST00003
• Trim Tool Set http://1aau.to/oaoG/1AXXX00006
• Large Locking Pliers
• Needle nose pliers http://1aau.to/oGV/1AXAA00051
• Needle nose pliers http://1aau.to/oGV/1AXAA00052
• Side Cutters
• Ratchet http://1aau.to/obUU/1AXAA00016
• Socket Extensions http://1aau.to/obR7/1AXAA00015
• Torque Wrench http://1aau.to/oaX4/1AXAA00044
• Anti-Seize Grease
• Gloves http://1aau.to/oaHk/1AXSS00048
• Safety Glasses
• Chisel http://1aau.to/omT/1AXAA00055
• Drain Pan
• Floor Jack http://1aau.to/oanh/1AXAA00068
• Hammer
• Small Hook
• Wheel Chocks

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.