Car Fix DIY Videos

https://www.1aauto.com/nissan-wheel-bearing-and-hub-assembly-pair/i/1ashs00879?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=rRm4Mx7yV-4
1A Auto shows you how to repair, install, fix, change or replace a worn out, vibrating or groaning front wheel bearing hub. This video is applicable to the 07, 08, 09, 10, 11, 12, 13, Nissan, Rogue

✔ List of Auto Parts from 1AAuto.com Related to This Repair:

1ASHF00466
1ASHS00879

🔨 List of Tools Used in this 1AAuto.com How-To Video:

• 10mm Socket
• 16mm Socket
• 17mm Socket
• 21mm Socket
• 32mm Socket
• Needle nose pliers
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Bungee Cord
• Center Punch
• Floor Jack
• Hammer
• Jack Stands

🔧 Instructions:

1. Removing the Wheel 0:55
2. Removing the Hub Nut 1:31
3. Removing the Hub 3:13
4. Installing the Hub 6:23
5. Installing the Axle Nut 7:34
6. Reattaching the Wheel 8:25

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.