After watching the video it made the job a lot easier. The total job took only ten minutes. Removing the lens from the clip was a snap after seeing this video. One suggestion, if you don’t have a magnetic wrench or socket you can always use a small pair of needle nose pliers to securely remove the lower bolt. Thank you again.
Just followed your excellent video and replaced the tail/stop globe in our Nissan Tiida (same car in Australia) Thank you very much. Used an open ended spanner on the top nut and a tube spanner on the bottom one.
My friend has this kind of problem with her nissan versa. now I have an idea how to help her to change te stop light bulb….the funny thing we never did any thing like this before. I hope that two women can do something right. Thank you.
This is fantastic for you to do this. I finally struck up the nerve to buy tools at the hardware store and if it wasn’t for the rain I’d probably have this done by now. It was a little difficult to get the nuts off my versa though. I used a 10mm deep socket attachment along with an extender.
As someone said earlier, thanks for restoring my faith in people. Thanks for taking the time to show this, as I would have seriously struggled to work it out for myself.
It is amazing that a person would take their personal time to make a video to help others. I would have definitely broken the light cover. You saved me time and money with your video. GOD Bless and Thank you !!!!
Thanks so much for posting this video. You saved me so much time & trouble.
Thank god i watched this before removing mine … very helpful 🙂
Thank you Sir.
Thanks for taking the time to produce this so helpful video!
Thanks for your Video! It was extremely helpful!
Thanks a lot ! All the respect for all the people that are doing these kind of videos !
Nice video! Thanks!
After watching the video it made the job a lot easier. The total job took only ten minutes. Removing the lens from the clip was a snap after seeing this video. One suggestion, if you don’t have a magnetic wrench or socket you can always use a small pair of needle nose pliers to securely remove the lower bolt. Thank you again.
Thank You Sir, you just got a new subscriber 😀
Thanks man! Huge help!
awesome video!!! keep up the good work!!
Thanks a lot! You saved me. Manual says go to the car agency :a
thanks man!
Thanks man, after a long day of work my daughter asked me to do this. Would likely have taken a while for me to figure it…
Thanks now I’m going to change the drivers side brake light in my wife’s 2012 Versa.
Just followed your excellent video and replaced the tail/stop globe in our Nissan Tiida (same car in Australia) Thank you very much. Used an open ended spanner on the top nut and a tube spanner on the bottom one.
My friend has this kind of problem with her nissan versa. now I have an idea how to help her to change te stop light bulb….the funny thing we never did any thing like this before. I hope that two women can do something right. Thank you.
This is fantastic for you to do this. I finally struck up the nerve to buy tools at the hardware store and if it wasn’t for the rain I’d probably have this done by now. It was a little difficult to get the nuts off my versa though. I used a 10mm deep socket attachment along with an extender.
Great video – thanks so much. I, being totally unmechanically minded had no idea how to do this. TY
Great video thanks a lot!
Does any one know how to change this bulb in a nissan versa 2012 ? I can’t do it and the 2012 is different from the 2007. Thanks
So true…taking a little time is helping so many of us.
I hear you, Juan…could not figure this thing out! Glad to have great instruction from this video…
Thanks now I won’t get a ticket cause my lights out! 🙂
after watching this video it took me 15 mins to change the light
thx
thanks for the advice it help me a lot ..thanks for taking time to share your video
хрень показывает, нудно.
About to do this based on your video. Thanks man!
Thanks
As someone said earlier, thanks for restoring my faith in people. Thanks for taking the time to show this, as I would have seriously struggled to work it out for myself.
It is amazing that a person would take their personal time to make a video to help others. I would have definitely broken the light cover. You saved me time and money with your video. GOD Bless and Thank you !!!!
I have the same feeling! in this weekend I´ll replace my light! Really is a great video. Thank you so much!