Buy Now!
New ABS Wheel Speed Sensor from 1AAuto.com http://1aau.to/ia/1ATRS00262
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tVe/1AXAA00013
• 14mm Socket http://1aau.to/tzo/1AXAA00015
• 18mm Socket http://1aau.to/tgq/1AXAA00043
• 19mm Socket http://1aau.to/tgq/1AXAA00043
• A Piece of Pipe (for leverage)
• Ratchet http://1aau.to/tuW/1AXAA00016
• Torque Wrench http://1aau.to/teX/1AXAA00044
• Cloth Rags http://1aau.to/taY/1AXSS00035
• White Grease
• Wire Ties
• 5mm Allen Wrench
• Floor Jack http://1aau.to/teH/1AXAA00068
• Hammer http://1aau.to/tcc/1AXAA00091
• Jack Stands http://1aau.to/teM/1AXAA00065
For More Info visit us at http://1aau.to/h/2q/
1A Auto Shows you how to install, repair, fix, change or replace a bad or broken ABS sensor and harness. This video is applicable to the 02, 03, 04, 05 Ford Explorer and Mercury Mountaineer.
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Why can you just replace the sensor instead if the whole harness??
Can someone tell me where I can get a wiring diagram for a 1998 Ford Explorer ABS system. You can email me at cretejake@gmail.com
I bought a wheelbearing for a 2011 ranger the abs plug was round and the ranger plug was oblong and the wires where different colors black blue white and brown any ideas why
Is the abs sensor the same as the wheel speed sensor?
Thanks for the great video. Question, when you changed the sensor harness, did you change the whole length from the sensor to the module. Or what exact segments of the harness did you change. I have a saab 2006 9-3 that needs the whole length of the wire changed, but I cant seem to find a part number for it.
The gm dealership told me I have The same problem with mine both sides need replacements 2004 Pontiac grand prix super charged
Is this the same way replaceing
Is there a way to check the abs sensor? Do you check the sensor resistance or voltage while spinning the wheel?
excelent . thanks so much!!!
the gasket on the rear end pigtail how do you change it